hadyn Posted July 31, 2008 Share Posted July 31, 2008 Wheres the best place to get exhaust gaskets from? Link to comment Share on other sites More sharing options...
jamesmark Posted July 31, 2008 Share Posted July 31, 2008 Chris Wilson. Link to comment Share on other sites More sharing options...
supra_si Posted August 1, 2008 Share Posted August 1, 2008 which do you need i have a cpl of hks 4 bolt ones Link to comment Share on other sites More sharing options...
hadyn Posted August 1, 2008 Author Share Posted August 1, 2008 erm probably the one that goes between the 2nd and 1st cat Link to comment Share on other sites More sharing options...
supra_si Posted August 1, 2008 Share Posted August 1, 2008 pass, or use loads of exhaust paste and get it real tightly bolted Link to comment Share on other sites More sharing options...
jamesmark Posted August 1, 2008 Share Posted August 1, 2008 1st cat to 2nd cat is 2 bolts the only joint that is different is manifold to 1st cat as that has 3 bolts and best to use paste on that join iirc. I must admit I hate exhaust paste and will always recommend using gaskets, just email Chris Wilson or Gaz @ Envy with what sizes you need and how many. Link to comment Share on other sites More sharing options...
hadyn Posted August 1, 2008 Author Share Posted August 1, 2008 do you need a thicker gasket on the 2nd decat to 1st cat? Link to comment Share on other sites More sharing options...
supra_si Posted August 1, 2008 Share Posted August 1, 2008 i got 2 bolt ones from hks via ebay ready for my second decat to get installed. Link to comment Share on other sites More sharing options...
jamesmark Posted August 1, 2008 Share Posted August 1, 2008 do you need a thicker gasket on the 2nd decat to 1st cat? Not sure to be honest mate, if you are going double decat and not running silly boost then you should be fine with a normal gasket. I know Chris sells both, when I bought mine off him I opted for the thicker ones just to be safe, iirc they were only about £7ish each. Link to comment Share on other sites More sharing options...
Gaz Walker Posted August 1, 2008 Share Posted August 1, 2008 I've got them in stock again now mate Gaz. Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 26, 2008 Share Posted October 26, 2008 sorry to bring back an old thread but i need gaskets for a 3" 2nd decat pipe, its goes to a nurspecR at the back and at the moment will bolt to the 1st cat allthough that'll change in a month or so but just need some gaskets in the mean time if anyone has any they're willing to sell or know of a place i can get them reasonably quickly. Link to comment Share on other sites More sharing options...
ivan Posted October 26, 2008 Share Posted October 26, 2008 Well there's two places been mentioned in this very thread. Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 26, 2008 Share Posted October 26, 2008 Well there's two places been mentioned in this very thread. oops, didn't see the very last post:( will pm envy Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now