Jay_vr6 Posted July 18, 2008 Share Posted July 18, 2008 (edited) Hi guys, I have Petes Trl active spoiler diagram, just one question, which of these relays do i need ? http://www.maplin.co.uk/Module.aspx?ModuleNo=37526&doy=18m7&C=SO&U=strat15 I just want to make sure I start with the right bits so I can rule out any silly probs from the start The relay diagram below http://homepage.ntlworld.com/peter.betts/supra/TechTips/spoiler6.gif Edited July 19, 2008 by Jay_vr6 (see edit history) Link to comment Share on other sites More sharing options...
Jay_vr6 Posted July 19, 2008 Author Share Posted July 19, 2008 Anyone ? Link to comment Share on other sites More sharing options...
suprasurrey Posted July 19, 2008 Share Posted July 19, 2008 Hi mate, I`m guessing that this circuit completely bypasses the standard active control? If this is the case you will need both relays and a suitable switch. The relays are drawn with a diode across the coils which I`m sure is not correct. Just for your information the pin numbers mean the following - 85 - coil 86 - coil 30 - common contact 87 - normally open contact 87a - normally closed contact Good luck:) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now