brians25 Posted February 17, 2008 Share Posted February 17, 2008 how do you take of the panel on the drivers door which contains the windows and door lock switches, i am wanting to send it for painting Quote Link to comment Share on other sites More sharing options...
Scott Posted February 17, 2008 Share Posted February 17, 2008 I did this the other day, its a bloody nightmare. You see all the brass screws on the back of the doorcard, you need to take most of them out. There are a couple of hidden ones too where i had to punch my screwdriver through the doorcard to get to them. Scott =op Quote Link to comment Share on other sites More sharing options...
brians25 Posted February 17, 2008 Author Share Posted February 17, 2008 cheers mate, mucho thanks Quote Link to comment Share on other sites More sharing options...
merckx Posted February 17, 2008 Share Posted February 17, 2008 There might be a guide somewhere, but here's a few pointers. Screws on the bottom , there's also a couple of plastic covers which conceal screws - located near the hinge. Also plastic rivets, push in the centre pin and the whole thing will pull out. If you remove the inside door latch, there'll be a bolt tucked away behind this (this is easlily missed). Quote Link to comment Share on other sites More sharing options...
Scott Posted February 17, 2008 Share Posted February 17, 2008 There might be a guide somewhere, but here's a few pointers. Screws on the bottom , there's also a couple of plastic covers which conceal screws - located near the hinge. Also plastic rivets, push in the centre pin and the whole thing will pull out. If you remove the inside door latch, there'll be a bolt tucked away behind this (this is easlily missed). Is that not instructions for removing the door card? Think he was after info on removing the window switch panel from the doorcard itself. Scott =op Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.