flukey-lukey Posted February 15, 2008 Share Posted February 15, 2008 For a trial rear. Is it a standard size square plate or will I have to order a 'special' size? Link to comment Share on other sites More sharing options...
CarlT67 Posted February 15, 2008 Share Posted February 15, 2008 I think its a little bigger thabn standard as there is a gap at the top of mine where you can see into the bumper... Link to comment Share on other sites More sharing options...
AndrewOW Posted February 15, 2008 Share Posted February 15, 2008 Probably a 13" x 7" then, like my new one. Not that I have a Trial rear! Link to comment Share on other sites More sharing options...
flukey-lukey Posted February 15, 2008 Author Share Posted February 15, 2008 so is 13" by 7" standard? Link to comment Share on other sites More sharing options...
AndrewOW Posted February 15, 2008 Share Posted February 15, 2008 Well that fits my standard bumper perfectly, as the previous one I had was 13" x 6.75" and was slightly too shallow. Link to comment Share on other sites More sharing options...
flukey-lukey Posted February 15, 2008 Author Share Posted February 15, 2008 Just had a look at your garage... I think that 13" by 7" is a little too long...but I could be wrong Link to comment Share on other sites More sharing options...
CarlT67 Posted February 15, 2008 Share Posted February 15, 2008 Yes the gap is over the top to bottom distance, Sorry for the slight hijack but where is a good place to get a custom plate, in a way that has a single black line around the edge and a footer with "www.mkivsupra.net" written on it as I want it to match the front which the previous owner got made. Link to comment Share on other sites More sharing options...
AndrewOW Posted February 15, 2008 Share Posted February 15, 2008 Just had a look at your garage... I think that 13" by 7" is a little too long...but I could be wrong Well the 13" x 7" does completely cover the hole that's in the standard bumper, with only a small overlap all round. Yes the gap is over the top to bottom distance, Sorry for the slight hijack but where is a good place to get a custom plate, in a way that has a single black line around the edge and a footer with "www.mkivsupra.net" written on it as I want it to match the front which the previous owner got made. I have got all my plates from this place over the years, and have found they're really good, and not too expensive: http://www.aplates.com/aplatesshop/platebuilder.asp I've got my new registration with a thin black border, and AndrewOW - http://www.mkivsupra.net underneath as a tag line. Both plates are 13" wide but differing depths. I could take a photo tomorrow if you like Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now