scottysupra Posted January 6, 2008 Share Posted January 6, 2008 Hi just a quick question im fitting an greddy electronic boost gauge soon and was wondering where you plumb the vacumn hose onto? Any ideas? Link to comment Share on other sites More sharing options...
Sandy-m2 Posted January 6, 2008 Share Posted January 6, 2008 http://www.mkiv.com/techarticles/boostguage/bg.htm hope it helps - i did it in about 30 mins Link to comment Share on other sites More sharing options...
bignum Posted January 6, 2008 Share Posted January 6, 2008 Isnt that NOT where to t into, if a pipe comes off you run lean. Their is another reference pipe to tap into cant find a picture right now Link to comment Share on other sites More sharing options...
bignum Posted January 6, 2008 Share Posted January 6, 2008 http://www.mkivsupra.net/vbb/showthread.php?t=67657&highlight=boost+gauge+fitting Link to comment Share on other sites More sharing options...
Chris and Alana Posted January 6, 2008 Share Posted January 6, 2008 I just tapped into the referance tube for the BOV (I have a HKS SSQV) Dont know if you have an aftermarket BOV at all but it's easy to get to and near the grommet to feet it through the bulkhead. Reads fine too. Link to comment Share on other sites More sharing options...
bignum Posted January 6, 2008 Share Posted January 6, 2008 I just tapped into the referance tube for the BOV (I have a HKS SSQV) Dont know if you have an aftermarket BOV at all but it's easy to get to and near the grommet to feet it through the bulkhead. Reads fine too. Or there is good Link to comment Share on other sites More sharing options...
scottysupra Posted January 7, 2008 Author Share Posted January 7, 2008 Thanks i can get round to fitting it now then. Also where abouts is the grommet on the bulkhead that you run the hose through??? Link to comment Share on other sites More sharing options...
bignum Posted January 8, 2008 Share Posted January 8, 2008 You`ll have to go through the the wing by taking the plastic wheelarch liner down, there is a route through both sides. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now