lee_kelsey Posted July 4, 2002 Share Posted July 4, 2002 Had my bonnet up the other day, and the wind got up and blew it around a bit. Now when it's shut there is a 3 or 4 mm gap between the lip and my drivers side headlight. Any tips on how to re-square it, or will i need to take it to a garage? Cheers Link to comment Share on other sites More sharing options...
Syed Shah Posted July 4, 2002 Share Posted July 4, 2002 Hmmm, it could just be that one on the two catches on the bonnet is not down, if this is the problem, close the bonnet again and push on the egde near the headlight, if the catch was not fastened properly it should click into place. Hopefully, this is the case as it is easy to do, and it means not damage was caused, if nothing solves it, I like the TRD bonnet......... Link to comment Share on other sites More sharing options...
Mark Ayling Posted July 4, 2002 Share Posted July 4, 2002 Yep, sounds like it to me - this is what happens: http://www.mpaconsultancy.co.uk/supra/bonnetopen.jpg But, as Syed says, there are other options should your bonnet be knackered: http://www.mpaconsultancy.co.uk/supra/veilsidebonnet.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now