Patters

Thanks supna, I'll give it a go tomorrow. There are no fault codes on the car, but the car has been standing around for a while, so I suppose I can't expect it to be perfect Thanks to you both, Patters

Hi to all, Having some problems with the idling of my car, when cold it doesn't like to rev very high. Also when coming to a stop the car nearly stalls, and to make matters worst it doesn't like starting up either Can anyone help? Thought it could be the idle control valve or throttle positon sensor. Any ideas?? Cheers Patters

Supra_Al, Your PM box is full so I couldn't post you my message on the details of what happened to my car. So I've E-mailed you............. i think. Basically, I posted the problem, which I had with the engine on this BBS at Christmas. I was getting a strange knocking noise that was worrying me. The chaps said to get it booked in to a garage as soon as possible. So I did, and the mechanic diagnosed that the BIG ENDS were knackered So the jobs being done now, but the company thats supplying the engine is taking the mick, so I'm looking elsewhere. I think the previous owner of my car didn't take care of it much, so I'm suffering cos of it Patters

Thanks lads, Thats okay then I'll order an engine without an EGR then. Once again you have answered my question and more. Cheers Patters

As above does the N/A engine have an EGR?? Whatever that is I'm basically having an engine change, which a local mechanic is doing for me. We've ordered an engine from an engine supplier, who is situated in the same village as my mechanic, but they are messing us around, so I'm trying to source an engine elsewhere. A company who might be able to get an N/A engine says that theres two makes of N/A engine, one with EGR and one without. Any help would be appreciated. Many thanks, Patters

I have had the same problem with my Supra, although its only a NA engine. The big ends have gone on mine, due to the previous owner neglecting it. The mechanic who's sorting my engine out reckons that buying the parts for the engine is very expensive and labour intensive. So he got me a used engine with 30,000 miles on it for £700, from a company that imports the engines from Japan's scrapyards. All in all its costing me around £1500, which is better than I expected. Patters

Yep, already done, I've had the rocker box covers off. No visual damage. Hmmm...... how confusing Patters

Also before I forget, having the cam cover off while running the engine, I noticed that the right handside cam ( The one which the noise is coming from), looks like its buckled, its not running straight, like the cam on the left handside, if you know what I mean. Thats why I thought it could be a bearing or something. Patters

Hmmm...... thats interesting, the noise is definately coming from the right side cam. Revving the car upto 3000rpm, the noise is like a knocking definately from the cam, then dropping down to idle the noise is a intermittent kinda crunching noise. Like there is a cracked bearing. I've had my ear right by it. Chris is there anything else you think it could be? I just want to have a basic idea of what it could be, so the garage can't blag me.......... it being just after Christmas and that! Cheers Patters

Thanks for your views, its going straight into my local garage when its open again. I'm hoping its a straight forward job, otherwise the bank manager is going to be after me! Thanks again, Patters

I've used Shell Optimax for a good year now. I've discovered the problem, it is one of the bearings in the cams. I can hear it every couple of seconds, when the engine is at idle. Could it be a DIY job? or is it too dangerous to start messing with? Anyone had this problem before? Patters

Hi, Merry Christmas to all........... I've got a strange noise coming from the top of the engine block. I noticed it a couple of months ago, but it seems to slowly getting worse. Its a knocking sound between 2500-3000ish rpm then through 5000+ rpm. It sounds as though theres not enough oil getting to the top of the engine. Could it be the bearings on the cams? Is it a big job? Thanks in advance. Patters

Thats a very good point. I'm going to have a look into that when I next get my car serviced. Toyota always seem to make a big thing about my car being an import.

Well, its a good all-rounder. Feels better at bottom and top end, I would recommend you to get one. I'm the loudest car around town at the moment, the rice boys think I'm a god:D

Yeap, its the proper Hks Hiper. I ordered it from Graham Goode, I was quite impressed with there customer service, they had to order it from Japan, all in all it took 5 days! Sounds flippin loud though!