ChrissupraSZ

cool ty m8

Hello guys, I currently have some crap 16" wheels on me sup at the mo. I think because of this the back end is bouncy when been powered and the car never rly feels like it handles well when im above 100mph. Could this because of the wheels and tyres(which btw r also crap makes)? could it also be down to no offset? hence if i buy some 18"s with the currect offset would me sup handle better and be more stable at speed?

lo guys... reet im off to the meet at Leeds this sunday. So, i badly want to get me new nosecone on. But, i need some advice. Reet its a top secret nose cone, i take the normal sup indicators will fit in the gaps yeah? Also taking the standard bumper off, is there anything thats gonne cause me probs? i.e. do i need to take the headlights out to fit the new bumper? cheers guys any advice would be helpful chris

of course not m8

hey geez sweeet thx. wanna convoy it down m8?

Hey guys, I'm only in Hull so ill check what im working and try and make it

i just bought some double sided trim repair tape from halfords

yes mate. the skirts are held on by a few screws and 10 mil bolts on the sill. they were a bit rusty but once they were loose i had no problems. the rear spats are just held on by 3 screws and double sided tape(which they were previously held on by). truthfully a very easy job. im going to put a line of silicone on the upper sill of the skirts just to make them solid. all the black plastic bits come off m8. They r all screws and bolts too. really wasnt hard m8. i would get someone to help you though. makes things alot easier when aligning the skirts. any probs gis a pm m8.

piccies old then new http://www.chrisandjo.karoo.net/

yup all done ill get some photos asap

really? sod it then ill go and fit them like that now cheers guys

metal bracket panties... reckon i can get one from toyota?

guys i have some standard toyota rear spats. Ive taken my old plastic bits off. But, where the bottom screw goes in there seems to be some sort of bracket missing. i.e there is about a 2inch space between the bottom of the spat and the screw whole. any ideas guys? am i missing a bracket?

thx m8ty whts the prob with the nose cone?

Guys im fitting the toyaota side skirts and top secret nose cone to me sup. b4 i begin and i right in thinking they all just bolt on? or do i need soem silicone to help? cheers chris