Jurgen-Jm-Imports Posted August 11, 2005 Share Posted August 11, 2005 anybody done this, do i need special tools, can a competent mechanic take the igniton barrel out or is it a right twat to do. any feedbck most welcome. or does anybody have a guide to do this cheers Quote Link to comment Share on other sites More sharing options...
heckler Posted August 11, 2005 Share Posted August 11, 2005 I can do the door ones, dunno about the ignition barrel though. Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted August 11, 2005 Author Share Posted August 11, 2005 I can do the door ones, dunno about the ignition barrel though. how did u find them Quote Link to comment Share on other sites More sharing options...
heckler Posted August 11, 2005 Share Posted August 11, 2005 how did u find them there not too bad to be honest, just have to stip everything off the lock barrel (there a nut and spring on the back) there a metal coller on the front which i prised off, stick the key and turn slightly and pull the barrel out Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted August 12, 2005 Author Share Posted August 12, 2005 what key the new one or old one as i dont have old keys Quote Link to comment Share on other sites More sharing options...
heckler Posted August 12, 2005 Share Posted August 12, 2005 what key the new one or old one as i dont have old keys if you dont have the old key. you will have to press the pawls down on the old barrel to slide it out, dont really need the key, it just makes it a bit easier. If you remove the barrel without the key, make sure the pawls dont spring out as the springs are very small! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.