MONKEYmark Posted July 5, 2004 Share Posted July 5, 2004 just sourcing bits for future turbo install.got a Power House Racing stage 2 fuel kit with 850cc injectors and a Power House Racing line lock kit. it just came today and looks a top quality bit of kit. the order only took about 4 or 5 days to get to me from america. have since seen the line lock kit at half the cost what i paid but not to worry. still saved loads on buying the kit in uk. bought the kit minus the dual walbros that i bought ages ago. the liquid filled gauge for the aeromotive FPR looks cool with like thick liquid inside the gauge. i will get there one day or another. need to sort out some electronics, was wanting an AEM ecu. but just thinking of buying a TETLEY ecu PHR Stage 2 Fuel System Upgrade. The PHR Stage 2 Fuel System is similar to the Stage 1 system, but includes larger fuel injectors along with dual Walbro fuel pumps for the highest flow rates possible. This newly-revised fuel system features the new PHR 17.25mm ID high flow fuel rail in addition to the potent Walbro GSS300 series in-tank fuel pumps. The 17.25mm fuel rail is a PHR exclusive, and is the largest ever designed and sold for the Supra. This fuel rail can flow enough fuel to safely support over 1,400 Horsepower. Stage 2 is a high quality complete fuel system upgrade for customers needing to support between 700 and 1,000 Rear Wheel Horsepower. Includes dual Walbro fuel pumps, PHR 17.25mm ID high flow fuel rail upgrade, Siemens 850cc fuel injectors, #6 Stainless Steel braided lines, PHR quick-release injector clips, liquid-filled fuel pressure gauge, Aeromotive EFI fuel pressure regulator, PHR regulator mounting bracket, polymer fuel pump wrap, and all necessary hardware for a complete installation. This dual fuel pump setup has been tested to over 1,000 Horsepower with no loss of fuel pressure. A very quiet and potent alternative to external fuel pump systems. 960cc and larger injectors are also available, please inquire. http://www.powerhouseracing.com/catalog/supratt/fuelrail.jpg PHR Line Lock Kit. For drag racing applications, the PHR line lock kit is used to lock the front wheels during a burn-out so the brakes are not worn and excessive heat generated at the rear wheels. This makes it much easier to do burn-outs in a manual transmission car, allowing you to concentrate on throttle modulation rather than holding the brakes. This complete kit includes a high quality Hurst line lock module, Teflon stainless steel brake lines, and all fittings needed for a complete install in your Supra. Price: $199.00 http://www.powerhouseracing.com/catalog/supratt/phrlinelock.jpg Quote Link to comment Share on other sites More sharing options...
eyefi Posted July 6, 2004 Share Posted July 6, 2004 nice one. where have u seen the cheap line lock? Quote Link to comment Share on other sites More sharing options...
MONKEYmark Posted July 6, 2004 Author Share Posted July 6, 2004 Originally posted by eyefi nice one. where have u seen the cheap line lock? pm sent Quote Link to comment Share on other sites More sharing options...
LeeT Posted July 6, 2004 Share Posted July 6, 2004 Originally posted by eyefi nice one. where have u seen the cheap line lock? same question:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.