Guest suprabass Posted March 23, 2010 Share Posted March 23, 2010 Ok was bleeding the powersteering on the car earlier following all instructions from write ups on here. system was bleeding fine left to right but on the left lock it would let out a whine, after a few goes and bubbles etc gone from the tank, I gave it another lock to th left it let out a big whine and then stopped. Knocked the car off and went to investigate, noticed fluid had sprayed everywere (light mist) but there was also drops on the floor. so after some looking I could see it dripping down the brace from what looks like the pressure feed tube, so cleaned it up and started the car up again let it idle and gave it another lock to lock. Turned off and came back to another few drops on the ground. and some spray in the engine bay. Now Im stuck to what it could be?? could it be just the gasket on the pressure feed tube and need tighted or is it more sinister??? Thanks Quote Link to comment Share on other sites More sharing options...
miko_supra Posted March 23, 2010 Share Posted March 23, 2010 A picture would be good. The hose isn't split is it? Quote Link to comment Share on other sites More sharing options...
Guest suprabass Posted March 23, 2010 Share Posted March 23, 2010 Not that I could see, I was getting to the point hunger was winning and gave up for the day lol. Just looking for more info or suggestions, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.