MARCUS1979 Posted August 31, 2008 Share Posted August 31, 2008 Picking up an active spoiler this coming weekend and want to fit it and wire it up so it goes up and down with a switch. Dont have the ecu for it so just want to wire it straight up myself to a toggle switch or something. Anyone any idea how to go about doing this and any links to what i need? Not very good when it comes to wiring up stuff so the more the detail the better Cheers Quote Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted August 31, 2008 Share Posted August 31, 2008 if ya do a search there sould be a wiring diagram somewhere , Quote Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted August 31, 2008 Share Posted August 31, 2008 I can't find it but i'm sure someone will post a link up . Quote Link to comment Share on other sites More sharing options...
JohnnyW Posted September 1, 2008 Share Posted September 1, 2008 http://homepage.ntlworld.com/peter.betts/supra/TechTips/Spoiler.htm Quote Link to comment Share on other sites More sharing options...
MARCUS1979 Posted September 1, 2008 Author Share Posted September 1, 2008 Diagrams like that confuse me though Anyone with any links to what i need to buy apart ftom the actual spoiler itself? Quote Link to comment Share on other sites More sharing options...
jon5698 Posted September 1, 2008 Share Posted September 1, 2008 I would say you need to buy a switch like the ones you use for the rear fog light, then you will need to run a wire for the earth to the switch, then run a switched live wire to the switch and then run a wire from the switch to the live of the motor which controls the spoiler, then run a ground wire to the motor. Hopefully this should work. Quote Link to comment Share on other sites More sharing options...
MARCUS1979 Posted September 2, 2008 Author Share Posted September 2, 2008 I would say you need to buy a switch like the ones you use for the rear fog light, then you will need to run a wire for the earth to the switch, then run a switched live wire to the switch and then run a wire from the switch to the live of the motor which controls the spoiler, then run a ground wire to the motor. Hopefully this should work. Dont want to sound thick but I've got a spare switch which has 3 connections which was used for the rear fog light what would those 3 connect to? Also i think i'm right in saying there is 5 connection points on the spoilers motor plug, would i need to use all of them and what does each one connect to? Sorry bit useless when it comes to wiring Quote Link to comment Share on other sites More sharing options...
MARCUS1979 Posted September 8, 2008 Author Share Posted September 8, 2008 Have now picked spoiler up so any help would be appreciated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.