miko_supra Posted December 18, 2007 Share Posted December 18, 2007 i need to torque up the bolts around the outer edge of the gearbox that fix it onto the engine. now am i right in what i've circled here is correct? http://xs222.xs.to/xs222/07512/095gearboxtorqueratings.JPG Quote Link to comment Share on other sites More sharing options...
SUPRASUZUKI Posted December 18, 2007 Share Posted December 18, 2007 i need to torque up the bolts around the outer edge of the gearbox that fix it onto the engine. now am i right in what i've circled here is correct? http://xs222.xs.to/xs222/07512/095gearboxtorqueratings.JPG Is there nothing listed as "transmission-to-cylinder block bolt"? The description you've circled doesn't seem right to me. I've never done this job on the Supra though (other models, but not the Sup). The info I've got suggests 37Nm for the 14mm bolts and 72Nm for the 17mm bolts. Quote Link to comment Share on other sites More sharing options...
miko_supra Posted December 18, 2007 Author Share Posted December 18, 2007 Is there nothing listed as "transmission-to-cylinder block bolt"? The description you've circled doesn't seem right to me. I've never done this job on the Supra though (other models, but not the Sup). The info I've got suggests 37Nm for the 14mm bolts and 72Nm for the 17mm bolts. cheers for the reply. i was thinking it didnt seem right, as there are different sized bolts on it. where did you find those ratings from? Quote Link to comment Share on other sites More sharing options...
SUPRASUZUKI Posted December 18, 2007 Share Posted December 18, 2007 I've got a manual on CD. The info seems the same layout (font, spacings, etc, etc) as that in your attachment. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.