AlanM Posted August 28, 2007 Share Posted August 28, 2007 Hi Just fitted my stubby arial this weekend. On the stock one there is a red and a green wire. I used the red for power. Whats the green one for? Just curious Quote Link to comment Share on other sites More sharing options...
steb9780 Posted August 28, 2007 Share Posted August 28, 2007 Hi Just fitted my stubby arial this weekend. On the stock one there is a red and a green wire. I used the red for power. Whats the green one for? Just curious I thought the power for the stock aerial only supplied power whils the aerial was going up?? Quote Link to comment Share on other sites More sharing options...
AlanM Posted August 28, 2007 Author Share Posted August 28, 2007 Well, there is a red cable comes out of the base of the stubby arial, I assume it is for a wee amplifying circuit The stock arial had a red and a green wire attached to it. Hey, its working, was just curious about the green wire Quote Link to comment Share on other sites More sharing options...
steb9780 Posted August 28, 2007 Share Posted August 28, 2007 Yep no worries I might do the same then. I put mine in and didn't bother wiring the amplifier. As I had read about the wire only supplying power for a short time. My aerial gets bad reception too sometimes without the amp bit, so will give that a try. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.