Kev.O Posted May 18, 2007 Share Posted May 18, 2007 With reference to the rings, do the CP Pistons simply fit straight into the block or do they need to be filed down/custom fitted? TIA Quote Link to comment Share on other sites More sharing options...
absz Posted May 18, 2007 Share Posted May 18, 2007 you will have to check the ring for clearance in the bore before fitment. the clearance range should be on the spec sheet. Quote Link to comment Share on other sites More sharing options...
Kev.O Posted May 18, 2007 Author Share Posted May 18, 2007 you will have to check the ring for clearance in the bore before fitment. the clearance range should be on the spec sheet. Just had a look at the spec sheet and it mentions file fitting Thanks for the help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.