tooquicktostop Posted November 13, 2007 Share Posted November 13, 2007 Ok I have just come back from Phoenix and have decided with Mark to change direction on my build and go for a new bottom end and have uprated Falcon rods and ARP bolts fitted to ensure I dont have to re-build again anytime soon, with this in mind I have for sale the engine I had purchased for the rebuild This engine is from Dude's car and is a well trusted engine, I am keeping the head from this car but have a head from my car to go with this, it may need a skim but has just had all the valves, seals and shims done, the spec is as follows as the engine is open and confirmed with the following ARP Rod bolts Uprated end caps Bores in good condition with just a few little marks, Mark has told me all is ok still for a light modified car Head has only 1000 miles since new valve seals and shims, a couple of marks on the head from the bottom end failure of my old engine, may need a light skim, Mark would explain better HKS 264 Exhaust Cam, 256 Inlet Cam HKS Cam pulley's Mark has the engine at Phoenix and if you have any questions ican not answer he will of course do his best to answer them, this engine is in his way now so must go quickly so make me an offer Link to comment Share on other sites More sharing options...
razza Posted November 13, 2007 Share Posted November 13, 2007 what do you consider a light modified car? Link to comment Share on other sites More sharing options...
tooquicktostop Posted November 13, 2007 Author Share Posted November 13, 2007 what do you consider a light modified car? Hi My car runs 600 bhp plus NOS and Mark was a little wary of how long it would last, I wanted the best and a new engine is the only starting point, if you want to ask Mark any questions I have nothing to hide and I saw the engine today it has some nice bits and with the HKS Cam and re worked head a good deal Link to comment Share on other sites More sharing options...
Sparky Posted November 13, 2007 Share Posted November 13, 2007 Razza have you still not got an engine! Link to comment Share on other sites More sharing options...
razza Posted November 13, 2007 Share Posted November 13, 2007 Razza have you still not got an engine! WOHOO!!! have an engine (not this one, labour might have been too much, sounds a good buy for someone though) Link to comment Share on other sites More sharing options...
tooquicktostop Posted November 13, 2007 Author Share Posted November 13, 2007 could get this put back together as a complete engine if the price is right Link to comment Share on other sites More sharing options...
tooquicktostop Posted November 15, 2007 Author Share Posted November 15, 2007 Mark is now putting this engine back together today and will has told me it will make a perfectly acceptable engine so I may have been a bit daft putting needs TLC, not looking for much just need this out of Marks way Link to comment Share on other sites More sharing options...
Robert Posted November 15, 2007 Share Posted November 15, 2007 PM me a price mate. Link to comment Share on other sites More sharing options...
ECK Posted November 15, 2007 Share Posted November 15, 2007 me too please mate;) interested Link to comment Share on other sites More sharing options...
tooquicktostop Posted November 20, 2007 Author Share Posted November 20, 2007 Bttt Link to comment Share on other sites More sharing options...
tooquicktostop Posted November 21, 2007 Author Share Posted November 21, 2007 OK head now sold, so anyone want a bottom end with ARP rod bolts ?? Link to comment Share on other sites More sharing options...
Recommended Posts