bradleyh_15 Posted August 25, 2020 Share Posted August 25, 2020 (edited) So I’ve owned my supra for quite some time now and 5 years ago I took it off the road to do an engine build. However as life loves to throw shit at you I had a few issues and the build was delayed as I ended up having a year off work and spent the £30k I had saved to do the rebuild. As it stood before being taken off the road However during that period it was dry stored in my workshop and slowly stripped down to a complete bare shell with just the front window left to be taken out. As you can see gathering a lot of dust I made the decision that I would go for a high horse power build so got in contact with Lee at SRD and he persuaded me that a Vvti head was the way to go. However one of those isn’t cheap to buy new so I sourced a Vvti engine from an aristo That engine is currently being stripped down and rebuilt at SRD as we speak to the following specifications Bottom end: Titan 3.4 litre stroker crank Titan oil pump drive Manley 3.4 litre stroker pistons Manley H-tuff+ rods Clevite bearings SRD brace kit with ARP hard wear Tomei oil baffle kit New Toyota oil pump New Toyota water pump All new tensioner’s New fluidampner PHR Black edition 4 piece pulls set SRD 6 phase 170amp alternator Head/ inlet: Kelford V202-D Cam’s BC 0310 Duel valve springs and titanium retainers BC 2950 valve locks BC 3930 bronze valve guides (inlet side) BC 3931 bronze valve guides (exhaust side) BC 3302 intake valves 1mm oversize BC 3303 exhaust valves 1 mm oversize Toyota shimless buckets All machined to SRD’s stage 5 specifications Hypertune 2JZ Big Port Inlet Manifold, 12 injector setup with 12 injector fuel rail Turbo: SRD Single Turbo Kit Supra, SRD T4 Billet collector SRD Billet Waste gate collector 4" DP and MP 60mm Screamer 76mm Intercooler pipe work with Precision V Band Flange PT8385 Gen 2 Street Fighter Turbo smart Gen V 60mm Power Gate SRD Oil Feed Kit SRD Oil return kit Fuelling: Aeromotive A1000 FPR, -8 ORB PHR Triple 485 Hanger Walbro 485 Pump PHR Billet Under Car line holder set x5 -8 High Flow Billet Fuel Filter with 30 Micron metal filter SRD E85 safe fuel system, lines and fittings ID1700x Injectors for 2JZ ID1050x Injectors 2JZ Engine management/ electrics: Syvecs S7 plus ecu Custom Milspec Engine Harness for 2JZ - VVTI R35 Coils Bosch Knock Sensor for Syvecs Toyota Knock Sensor Adapter Boost Solenoid 4 Port SRD Boost solenoid bracket Syvecs Pressure Sensor Syvecs 4 Bar to NPT Syvecs NTK O2 Sensor. Intercooler and pipework: ETS 6" Intercooler Core -3 Inlet - 3.5" Out let - Anodised Black Drive train and suspension/ chassis: SRD prop RPS Tripple Plate Strapless Carbon Clutch with Steel Billet Flywheel OS Giken LSD JZA80 9" diff OS Giken Diff oil 250R SRD Billet Diff Cover Large Case Toyota Diff Fitting Kit New Bearings New Seals New O rings New Bolts V160 gearbox New TRD gearbox mount Full super pro Polly bush kit TRD engine mounts BC racing ER series coil overs and springs JAP speed front and rear upper, lower and tow arms fully adjustable arms All new wheel bearings, seals, retaining clips, caps and flanges front and rear hubs Front and rear hubs sand blasted, zinc treated and painted with new carrier bushes New clutch release fork New gearbox inspection covers Shifter assembly stripped down zinc coated and painted with new bushes, dust boot, yoke control, control bracket, shaft control, shifter boot and bolts Wheels/ Body/ interior and dress up parts: LED front fog/ indicators Carbon LED rear lights prospec imports headlight carbon inserts whifbits carbon headlight duct Seibon carbon front wings Seibon carbon boot lid Carbon engine covers Carbon spark plug cover LED heater upgrade New 6 speed gear knob New centre console Black carpet and headlining CCW classic wheels custom sizes finished in a polished lip with a bronze centre Recaro podium bucket seats with gosling racing fully adjustable mounts steering wheel reconditioned by royal steering wheels Gary England carbon spoiler blade and carbon TRD legs full glass out respray with under seal Brakes: AP racing 6 pot 362mm front AP racing 4 pot 330mm rear portfield pads front and rear Miscellaneous: SRD Heater Hose Kit SRD Custom Intercooler pipe work for Hypertune SRD -12 Custom Breather Setup Toyota Engine Cusco D1 40 cromoly 8 point around dash roll cage with harness bar ..... - - - Updated - - - ...... Edited November 26, 2022 by bradleyh_15 Title update (see edit history) Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 25, 2020 Author Share Posted August 25, 2020 Beginnings of the engine rebuild Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 25, 2020 Author Share Posted August 25, 2020 Diff has aqua blasted, vinc treated and painted along with the rear sub frame Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 25, 2020 Author Share Posted August 25, 2020 All new bushes, bolts and arms for the whole car not just using the sorry 20 odd year old ones that were put in when it was first made. The hubs have also had the bearing pressed out and will be getting the same treatment as soon as I get some time off work. The front sub frame will also be accompanying them before it gets reassembled with brand new arms and bolts. Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 25, 2020 Author Share Posted August 25, 2020 A few pictures of the parts before they build Turbo kit :cool: Quote Link to comment Share on other sites More sharing options...
hamzahkhan Posted August 27, 2020 Share Posted August 27, 2020 Well that escalated quickly! Excellent read, looking forward to the updates and all the best with the project. 1 Quote Link to comment Share on other sites More sharing options...
Dnk Posted August 27, 2020 Share Posted August 27, 2020 All the best with the project 1 Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted August 27, 2020 Share Posted August 27, 2020 Diff has aqua blasted, vinc treated and painted along with the rear sub frame [ATTACH=CONFIG]237520[/ATTACH][ATTACH=CONFIG]237521[/ATTACH] What are the round discs you've got on the rear subframe bushes? 1 Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 28, 2020 Author Share Posted August 28, 2020 They came with the super pro Polly bush set. One goes either side of the new bush. Missed the super pro bush kit and suspension off the spec list ^ Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 28, 2020 Author Share Posted August 28, 2020 Thanks mate :thumbs: Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 28, 2020 Author Share Posted August 28, 2020 Thanks, I will try and remember to take as many pictures as I can and up date all the small things as well as the big things Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted August 29, 2020 Author Share Posted August 29, 2020 A few more pictures I hadn’t added Hypertune inlet AP breaks (sorry they are all boxed up) BC coil overs Rear lights Syvecs Quote Link to comment Share on other sites More sharing options...
Tyson Posted September 1, 2020 Share Posted September 1, 2020 All the best with this, subscribed and move to project threads. 1 Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 8, 2020 Author Share Posted September 8, 2020 (edited) Got a couple of updates from Lee at SRD today. Coming along nicely Bottom end coming along nicely Edited September 8, 2020 by bradleyh_15 (see edit history) Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 8, 2020 Author Share Posted September 8, 2020 Thanks, much appreciated:thumbs: Quote Link to comment Share on other sites More sharing options...
Style Posted September 9, 2020 Share Posted September 9, 2020 Mega build this, keep the updates coming 1 Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 9, 2020 Author Share Posted September 9, 2020 Mega build this, keep the updates coming Thanks mate, will do Quote Link to comment Share on other sites More sharing options...
Peter P Posted September 12, 2020 Share Posted September 12, 2020 Great build thread, interested to follow your progress as this has a lot of the bits I am looking to do on my build as well. Please do keep it going and share as many photos as you can mate, look forward to following your progress and seeing this come together. 1 Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 12, 2020 Author Share Posted September 12, 2020 Great build thread, interested to follow your progress as this has a lot of the bits I am looking to do on my build as well. Please do keep it going and share as many photos as you can mate, look forward to following your progress and seeing this come together. Will do mate, some times I do stuff then forget to take pictures. you staying auto box? Quote Link to comment Share on other sites More sharing options...
Peter P Posted September 12, 2020 Share Posted September 12, 2020 Will do mate, some times I do stuff then forget to take pictures. you staying auto box? I know what you mean, I’m guilty of that as well mate! Yes, but not the factory auto. Going 8-speed auto using the ISF/SRD conversion. Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 13, 2020 Author Share Posted September 13, 2020 I know what you mean, I’m guilty of that as well mate! Yes, but not the factory auto. Going 8-speed auto using the ISF/SRD conversion. That’s going to be nice what power goal do you have? Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 13, 2020 Author Share Posted September 13, 2020 A few pictures I haven’t yet uploaded AP set up Some seibon parts also, boot and front wings. Will still have the originals as well Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 13, 2020 Author Share Posted September 13, 2020 Super pro Polly bushes Hub bushes, body bushes and selector lower gator Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted September 13, 2020 Author Share Posted September 13, 2020 New bushes, gaiter/ dust covers and painted Quote Link to comment Share on other sites More sharing options...
Peter P Posted September 13, 2020 Share Posted September 13, 2020 That’s going to be nice what power goal do you have? Looking for 900whp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.