Jump to content
The mkiv Supra Owners Club

Kakimoto Racing Forged wheels


icemanv6

Recommended Posts

Re-done this with suitably sized pictures this time :)

 

Four kakimoto racing wheels with tyres.

 

17 Inch, tyres are 215/45 on the front, and 245/40 on the rear,

 

Front tyres still got a few mm's of grip left on them, but the rear's don't have much left so would need replacing really soon.

 

Bought these before to do them up, but want to put money elsewhere now to other area's of my car, so there just sitting in the garage doing nothing, they will need a refurb, previous owner painted the inner part of the alloy black I believe and paint has started to crack and come off as shown in pictures.

 

I believe there quite a light wheel also.

 

Open to offers or a swap + money with any other 17inch wheels (need to be in good condition though). Priv Message me or on the thread.

 

 

http://kojn.mkzelda.net/Photo025-resize.jpg

 

http://kojn.mkzelda.net/Photo026-resize.jpg

 

http://kojn.mkzelda.net/Photo027-resize.jpg

 

http://kojn.mkzelda.net/Photo028-resize.jpg

 

http://kojn.mkzelda.net/Photo031-resize.jpg

 

http://kojn.mkzelda.net/Photo032-resize.jpg

 

http://kojn.mkzelda.net/Photo033-resize.jpg

 

http://kojn.mkzelda.net/Photo033-resize.jpg

 

http://kojn.mkzelda.net/Photo034-resize.jpg

 

http://kojn.mkzelda.net/Photo035-resize.jpg

 

http://kojn.mkzelda.net/Photo036-resize.jpg

 

http://kojn.mkzelda.net/Photo037-resize.jpg

 

http://kojn.mkzelda.net/Photo038-resize.jpg

Link to comment
Share on other sites

  • 1 month later...
are they safe for road use with all that holes made?

 

They don't look very safe :(

 

Think your exagerating just a bit, there just surface pit marks in the alloy, they look worse than what they are due to the size and close up nature of the pics taken

 

Lots of alloys will be just as bad if not worse, wouldn't take much to rub those down so i wouldn't worry about them

Link to comment
Share on other sites

Think your exagerating just a bit, there just surface pit marks in the alloy, they look worse than what they are due to the size and close up nature of the pics taken

 

Lots of alloys will be just as bad if not worse, wouldn't take much to rub those down so i wouldn't worry about them

 

I think they are probably talking about the 8 holes in the centre of the wheel that have been drilled out :cool::)

Link to comment
Share on other sites

I think they are probably talking about the 8 holes in the centre of the wheel that have been drilled out :cool::)

 

I think thats done when their made, i think a few wheels come like that, its not great but not a drama in my book

Link to comment
Share on other sites

Has there been additonal holes drilled in the alloy to allow them to fit additonal PCD's.

 

I think you'll find these are so the wheel can fit a 4 stud hub and a 5 stud hub, not differant pcd's

Link to comment
Share on other sites

I think thats done when their made, i think a few wheels come like that, its not great but not a drama in my book

 

Yep, Just checked out a few other pictures on google, and they have the exact same drilled holes, so this is how they have come when they were made.

Link to comment
Share on other sites

I'm in Rotherham, was going to suggest popping up and taking a look at these, only problem is all my spare time is going into doing up my house to sell it. I'm going to have to put hunting for new wheel son hold for a week or two.

I'll pm you when I have more time and see if you still have these available.

Link to comment
Share on other sites

  • 3 months later...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.