Jump to content
The mkiv Supra Owners Club

Gauge options..


JustGav
 Share

Recommended Posts

  • 2 weeks later...
MXL Display for AEM systems

 

The MXL family of displays and data loggers are plug and play compatible with all AEM engine management systems. The AEM system must have firmware version 1.19 or higher for it to recognize the MXL. The MXL connects to the AEM units via a serial RS-232 connection.

 

With an MXL display or data logger plugged into your AEM system, you add a powerful, stunning display and data logger to your car. The MXL Strada is a dedicated street display, the MXL Pista and MXL Pro are racer-oriented data acquisition systems.

 

http://www.aimsports.com/products/AEM-digital-display/index.html

 

 

 

Its a tad expensive but methinks exactly what I have been looking for. I don't like millions of gauges all over the place and at the mo I have 5 which bugs me a bit. As I run an AEM ECU it would make sense to get rid of the HKS EGT,Boost,and Oil pressure and temp gauges and run them through this one gizmo. The wideband is a small gauge so I don't mind keeping that seperate.

Link to comment
Share on other sites

  • 1 year later...

Well just found a new setup, retails around the 400 mark.

 

http://www.sigmaautomotive.com/gauge/drewtech/dashdaq.php

 

Called the DashDAQ, its basically a OBDII display and scanner, Sat nav, and Can be configured for lots of ECU's and logging equipment such as the innovate stuff. Its touch screen aswell, with a good resolution. Support for Link, AEM to follow but lots supported at the moment

 

image

 

image

 

image

 

image

Link to comment
Share on other sites

  • 4 months later...
  • 1 year later...
Well just found a new setup, retails around the 400 mark.

 

http://www.sigmaautomotive.com/gauge/drewtech/dashdaq.php

 

Called the DashDAQ, its basically a OBDII display and scanner, Sat nav, and Can be configured for lots of ECU's and logging equipment such as the innovate stuff. Its touch screen aswell, with a good resolution. Support for Link, AEM to follow but lots supported at the moment

 

http://www.sigmaautomotive.com/gauge/drewtech/main2.jpg

 

http://www.sigmaautomotive.com/gauge/drewtech/gauge03.gif

 

http://www.sigmaautomotive.com/gauge/drewtech/gauge04.gif

 

http://www.sigmaautomotive.com/gauge/drewtech/specs.jpg

 

Does this one accept EGT, boost, and AFR sensor inputs then? Looks like the blurb says it does but for that money I'd want to know which sensors and wiring harness's I'd need

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.