C4 SUP Posted January 4, 2006 Share Posted January 4, 2006 Not really technical but can anyone take a few pictures of a rear window spoiler mounting, both from the outside and mounting bracket. I have tried to fit mine but it catches both on the roof and the side area!! Ian Quote Link to comment Share on other sites More sharing options...
Pixelfill Posted January 4, 2006 Share Posted January 4, 2006 Mike Quote Link to comment Share on other sites More sharing options...
C4 SUP Posted January 4, 2006 Author Share Posted January 4, 2006 Quote Link to comment Share on other sites More sharing options...
Boomer Posted January 4, 2006 Share Posted January 4, 2006 Not sure if if this is the bit you are after. Is it the sun visor type thing in this picture? Quote Link to comment Share on other sites More sharing options...
Guest gzaerojon Posted January 4, 2006 Share Posted January 4, 2006 still not sure if i like these or not.. Quote Link to comment Share on other sites More sharing options...
C4 SUP Posted January 5, 2006 Author Share Posted January 5, 2006 Not sure if if this is the bit you are after. Is it the sun visor type thing in this picture? That`s the one. Is it possible to take a picture of one of the brackets with the hatch open. Also, does the top edge nearest the roof ever foul the roof? Ian Quote Link to comment Share on other sites More sharing options...
Boomer Posted January 6, 2006 Share Posted January 6, 2006 It does not foul on mine, but as you can (hopefully) see it is not flush with the top of the boot, but set down a tad. Quote Link to comment Share on other sites More sharing options...
C4 SUP Posted January 6, 2006 Author Share Posted January 6, 2006 It does not foul on mine, but as you can (hopefully) see it is not flush with the top of the boot, but set down a tad. Thank you Boomer, It`s as I suspected, I was trying to get mine so that the top lip is over the top of the hatch which looks better but it fouls!! Thank`s for going to the trouble of taking the pictures, I do love this club. If you`re ever in Newquay, give us a call. Cheers Ian:respekt: Quote Link to comment Share on other sites More sharing options...
C_Strike Posted May 10, 2014 Share Posted May 10, 2014 Old bump but trying to fit mine currently. Seems a common problem making it sit flush along the top. Im going to buy some 3m double side sticky tape for securing the top edge of the panel against the top. There seems to be no distinctive location along the boot to mount it. Anyone have any experience, words of wisdon or extra advice when fitting one? Quote Link to comment Share on other sites More sharing options...
kayjay0_7 Posted May 10, 2014 Share Posted May 10, 2014 Fitted mine properly today Think it could have gone up a little higher Quote Link to comment Share on other sites More sharing options...
evinX Posted August 31, 2014 Share Posted August 31, 2014 Bringing this post back up, can anyone tell me if I need to drill 3 holes at the bottom inner of the bootlid for the 3 screws on each side or do they just act as a clamp on the groove? thanks, Kev Quote Link to comment Share on other sites More sharing options...
jjs_82 Posted August 31, 2014 Share Posted August 31, 2014 They just clamp Quote Link to comment Share on other sites More sharing options...
quarryman Posted September 2, 2014 Share Posted September 2, 2014 hmmm. mine fit around the tailgate top without catching but there is only a gnats bollock between the paintwork of the roof Quote Link to comment Share on other sites More sharing options...
quarryman Posted September 2, 2014 Share Posted September 2, 2014 hmmm. mine fits around the tailgate top without catching but there is only a gnats bollock between the paintwork of the roof Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.