Page 3 of 10 FirstFirst 1234567 ... LastLast
Results 31 to 45 of 137

Thread: FAQ: Spark plugs

  1. #31
    Me? Post? Never! Club Member Jive's Avatar
    Join Date
    Feb 2003
    Location
    England - Hampshire
    Posts
    2,308
    Feedback
    2 (100%)
    Quote Originally Posted by Robert View Post
    any of the plugs Alex has mentioned will be fine, just depends on how must you wanna spend.
    Ok, thanks, I'll have a look around at the different prices, cheers
    '94 - J-Spec NA - Storm Blue - Aerotop [172 rwhp @ 7042rpm - 151 lb/ft @ 2643 rpm]
    Joe Sport - 6 spoke 18" alloys
    Visit my site
    No Supra - No Speed . . . . Know Supra - Know Speed!
    Woman - "I haven't got a romantic bone in my body" - Man - "Well you could have if you unzip my trousers"

  2. #32
    Did somebody say carbon? Club Member Ric's Avatar
    Join Date
    Jun 2006
    Location
    England - South Yorkshire
    Posts
    9,370
    Feedback
    34 (100%)
    www.sparkplugs.co.uk

    Best prices ive found as yet

  3. #33
    Project Stealth lives! Club Member Robert's Avatar
    Join Date
    May 2004
    Location
    England - Greater London
    Posts
    5,944
    Feedback
    79 (100%)
    Quote Originally Posted by Ric View Post
    www.sparkplugs.co.uk

    Best prices ive found as yet
    my local motor factors are quite a bit cheaper so is halfords for the plugs i need anyways.

  4. #34
    Me? Post? Never! Club Member Jive's Avatar
    Join Date
    Feb 2003
    Location
    England - Hampshire
    Posts
    2,308
    Feedback
    2 (100%)
    Quote Originally Posted by Ric View Post
    www.sparkplugs.co.uk

    Best prices ive found as yet
    They don't stock these NGK - BKR5EGP - I just picked these from the list to see the prices, unless I'm being blind
    '94 - J-Spec NA - Storm Blue - Aerotop [172 rwhp @ 7042rpm - 151 lb/ft @ 2643 rpm]
    Joe Sport - 6 spoke 18" alloys
    Visit my site
    No Supra - No Speed . . . . Know Supra - Know Speed!
    Woman - "I haven't got a romantic bone in my body" - Man - "Well you could have if you unzip my trousers"

  5. #35
    Project Stealth lives! Club Member Robert's Avatar
    Join Date
    May 2004
    Location
    England - Greater London
    Posts
    5,944
    Feedback
    79 (100%)
    They don't stock the BKR5EGP but they have the BKR5EYA there, still over priced as they are about 1.40 per plug from my local place.

  6. #36
    Did somebody say carbon? Club Member Ric's Avatar
    Join Date
    Jun 2006
    Location
    England - South Yorkshire
    Posts
    9,370
    Feedback
    34 (100%)
    would appear not on their list, give them a call when they open back up

  7. #37
    Me? Post? Never! Club Member Jive's Avatar
    Join Date
    Feb 2003
    Location
    England - Hampshire
    Posts
    2,308
    Feedback
    2 (100%)
    Quote Originally Posted by Robert View Post
    They don't stoc kthe BKR%EGP but they have the BKR5EYA there, still over priced as they are about 1.40 per plug from my local place.
    Gonna have to ask my local shop and see what prices they're quoting, otherwise I might have to get you to send me your local shops number
    '94 - J-Spec NA - Storm Blue - Aerotop [172 rwhp @ 7042rpm - 151 lb/ft @ 2643 rpm]
    Joe Sport - 6 spoke 18" alloys
    Visit my site
    No Supra - No Speed . . . . Know Supra - Know Speed!
    Woman - "I haven't got a romantic bone in my body" - Man - "Well you could have if you unzip my trousers"

  8. #38
    Project Stealth lives! Club Member Robert's Avatar
    Join Date
    May 2004
    Location
    England - Greater London
    Posts
    5,944
    Feedback
    79 (100%)
    If your having trouble getting some let me know and i'll post you a set.

  9. #39
    Me? Post? Never! Club Member Jive's Avatar
    Join Date
    Feb 2003
    Location
    England - Hampshire
    Posts
    2,308
    Feedback
    2 (100%)
    Quote Originally Posted by Robert View Post
    If your having trouble getting some let me know and i'll post you a set.
    Top man, will do, thanks again
    '94 - J-Spec NA - Storm Blue - Aerotop [172 rwhp @ 7042rpm - 151 lb/ft @ 2643 rpm]
    Joe Sport - 6 spoke 18" alloys
    Visit my site
    No Supra - No Speed . . . . Know Supra - Know Speed!
    Woman - "I haven't got a romantic bone in my body" - Man - "Well you could have if you unzip my trousers"

  10. #40
    BANNED BANNED Rays the roof's Avatar
    Join Date
    Mar 2004
    Location
    England - Lancashire
    Posts
    2,910
    Feedback
    104 (97%)

    Top bloke

    Great thread and prices a little cheaper than Halfrauds who quoted me 120+ for plugs for NA...

  11. #41
    96 GZ Auto Club Member AndyT's Avatar
    Join Date
    Mar 2007
    Location
    England - Hampshire
    Posts
    7,951
    Feedback
    23 (100%)

    Sparky God

    Terrific advice Alex. One of the most comprehensive studies here..

  12. #42
    Subtle/Diplomatic Club Member Alex's Avatar
    Join Date
    Jun 2001
    Location
    England - Norfolk
    Posts
    15,803
    Feedback
    13 (100%)
    What to use when MAPPING?
    A. Use only copper plugs when mapping. Iridium plugs should be saved for an engine that is already mapped and tested on coppers. This is because the mapping process is fraught with danger and that danger is det. Detonation will ruin a copper plug, but the engine will be kept safe. An iridium plug is much more immune to det and other parts of the engine can suffer long before the plugs do. Stay safe and use copper plugs when mapping!
    Last edited by Alex; 01-07-07 at 21:57.
    - Alex

    2012 BMW S1000RR Black
    ex - 1996 TT Gunmetal Facelift Auto, ex - 1998 RSP TT6 VVT-i BL-T61, ex - 1993 MSB TT6 w/ MINES ECU / BBS LM's, ex - 1995 S13 200SX Facelift
    ______________________________________

  13. #43
    I'm a newbie
    Join Date
    May 2007
    Location
    England - Isle of Man
    Posts
    5
    Feedback
    0
    whats the hp rating of a IK24 IRIDIUM PLUG FOR A SINGLE TURBO SUPRA ??????

  14. #44
    moosebuster1st
    Guest
    bloody good thread well done.......

  15. #45
    I'm a newbie
    Join Date
    May 2007
    Location
    England - Isle of Man
    Posts
    5
    Feedback
    0
    Denso Iridium - IK24 - leave gap alone<<<<

    wrong ...the ik 24s HAVE A 0.8 MM GAP ( 0.031") either use a hks dli with it for a single turbo supra or bring the gap down to 0.7mm

Page 3 of 10 FirstFirst 1234567 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •