Chris Wilson Posted January 22, 2019 Share Posted January 22, 2019 I have just done a new batch of these, and they tend to sell quite fast. Since Greddy and TRL stopped doing their very nice and reliable fuel cut defenders I have been wondering about building a sensibly priced alternative. The great thing with the Greddy is it did not clamp the MAP sensor voltage until the pre-set threshold was reached. The HKS one was not so nice and skewed the output from the MAP sensor, thereby also skewing the fuel curve. I have now tooled up to produce my own FCD that leaves the MAP sensor output *totally* unaltered until the voltage clamp threshold is reached, just like the Greddy ones did, when they were still available, but using more modern, closer tolerance components and a slight circuit improvement. It also uses the same colour wires as the Greddy, meaning the excellent on line pictorial fitting instructions at http://mkiv.com/techarticles/bcc/bcc_install/bcc.htm can be used to aid fitting, which is very easy. They come with an earth eyelet ready soldered on, meaning only three other wires to connect. Use the central stud or the main ecu to floor pan for th earth terminal, under the 10mm socket size nut. They come pre set on lab standard equipment,to suit either VVTi or earlier TT models. If you have a VVTi or 1JZ-GTE let me know when ordering. I have 6 ready to ship, the last batch sold out very quickly. They can be programmed for other MAP sensor turbo engines like Mitsubishis, RX7's, Skylines, MR2 turbos, blah blah. If you can mention them on other forums where you may be a member I will be very grateful! Price is £65 plus VAT with £5.80 plus VAT insured P&P to any UK post code. That's £84.96 grand total. Please ask for a delivery price to other places if required. Thanks. - - - Updated - - - I can supply wiring schematic for the VVTi if required. Just different ecu pins used, as easy to fit to a VVTi as a none VVTi engine, 4 wires to connect, one being an eyelet terminated ground wire like the none VVTi ones. Link to comment Share on other sites More sharing options...
AC93 Posted January 22, 2019 Share Posted January 22, 2019 I can vouch for CW's FCD, had one on my TT for well over a year now and had no issues! Link to comment Share on other sites More sharing options...
T2 MSW Posted January 22, 2019 Share Posted January 22, 2019 Ill have a VVTI one please Chris, Please let me know how you would like payment? Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 22, 2019 Author Share Posted January 22, 2019 Ill have a VVTI one please Chris, Please let me know how you would like payment? Either a Paypal "Family and friends" payment or normal Paypal please add 4%, or I can send bank details if you prefer? I have a VVTi one in stock, cheers. Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 22, 2019 Author Share Posted January 22, 2019 I can vouch for CW's FCD, had one on my TT for well over a year now and had no issues! Thanks, they should last "forever" as I used top notch components and they are potted against damp Link to comment Share on other sites More sharing options...
T2 MSW Posted January 22, 2019 Share Posted January 22, 2019 Either a Paypal "Family and friends" payment or normal Paypal please add 4%, or I can send bank details if you prefer? I have a VVTi one in stock, cheers. Assuming the email address in your signature is your PayPal address?? Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 22, 2019 Author Share Posted January 22, 2019 Assuming the email address in your signature is your PayPal address?? Sorry, yes it is: [email protected] Thanks. Link to comment Share on other sites More sharing options...
tayr Posted January 22, 2019 Share Posted January 22, 2019 I'll have one - will send payment in a sec Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 22, 2019 Author Share Posted January 22, 2019 I'll have one - will send payment in a sec No problem, but I need to know whether it's for a VVTi or none VVTi please? Thanks! Link to comment Share on other sites More sharing options...
tayr Posted January 22, 2019 Share Posted January 22, 2019 No problem, but I need to know whether it's for a VVTi or none VVTi please? Thanks! put it in the paypal notes mate - its 1996 but pre vvti Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 22, 2019 Author Share Posted January 22, 2019 No problem, your name is on it Thanks! Link to comment Share on other sites More sharing options...
Swampy442 Posted January 22, 2019 Share Posted January 22, 2019 Another satisfied customer here of Mr Wilsons FCD's Link to comment Share on other sites More sharing options...
T2 MSW Posted January 22, 2019 Share Posted January 22, 2019 Money sent for a VVTI one - Thank you Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 23, 2019 Author Share Posted January 23, 2019 All promised payments received, thank you! I will pot them up tonight and they should go out tomorrow, by DPD, cheers all. Link to comment Share on other sites More sharing options...
T2 MSW Posted February 1, 2019 Share Posted February 1, 2019 Received today thank you. Unfortunately no wiring schematic included. Please can you either post a link or email it across? Link to comment Share on other sites More sharing options...
Chris Wilson Posted February 2, 2019 Author Share Posted February 2, 2019 Hi, link is in my first post (the advert) I used the same wire colours as the Greddy so wire the same. For a VVTi the actual ECU pin outs are different and are attached. Thanks. Link to comment Share on other sites More sharing options...
T2 MSW Posted February 2, 2019 Share Posted February 2, 2019 Cheers Chris Link to comment Share on other sites More sharing options...
Mattlaw Posted April 4, 2019 Share Posted April 4, 2019 Are there anymore of these left? Or have they all sold? Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 4, 2019 Author Share Posted April 4, 2019 One left, found it today, thought they had all gone but was hiding in the wrong box Link to comment Share on other sites More sharing options...
novak Posted April 4, 2019 Share Posted April 4, 2019 Just in case I have one of Chris's brand new for sale. If no stock left. Link to comment Share on other sites More sharing options...
NAM_killer Posted April 6, 2019 Share Posted April 6, 2019 I'll take one if it's still there. VVTI Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 6, 2019 Author Share Posted April 6, 2019 I have had a few requests on another forum so I am sacrificing doing the garden tomorrow to making a new batch, so yes, by Monday there'll be more available E-mail me at [email protected] to order, thanks. Link to comment Share on other sites More sharing options...
Recommended Posts