Members banned from this thread: RobD, Budz86, ray007, suprageek, zach42o1, Caesard, msmile, Reyft, Sausage and Dzowani


Results 1 to 13 of 13

Thread: Mines ECU - Manual 2JZ-GE

  1. #1
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0

    Mines ECU - Manual 2JZ-GE

    Mines ECU for a manual 2JZ-GE

    This is a plug and play ECU upgrade for NA manual cars made by Mines. I found this made a significant improvement to both response and acceleration on my car. The ECU removes the factory speed limiter, increases the rev limit to 8200rpm (though I have never taken it this high - only to around 8000rpm) and the map increases the peak power to around 240bhp with supporting mods (i.e. air filter, decat and aftermarket exhaust). The previous owner carried out dyno power runs with this and a stock ecu to compare the two and from memory it increased the power and torque output by around 5-10% over a significant portion of the rev range and removed the dip caused from the ACIS butterfly valve opening at around 5000rpm.

    The ECU is in fully working condition with the warranty sticker intact - removed from my car last weekend. I have had this on my car for the last 3 years and it has worked flawlessly. I am installing a turbo so I no longer need this.

    I am looking for 350 for it excluding postage - I can post this however collection from the Bristol area would be preferred.
    Attached Images Attached Images
    Last edited by Sooty; 20-02-19 at 18:19. Reason: Added photos

  2. #2
    Posting is my life! Club Member Kendo11's Avatar
    Join Date
    Sep 2013
    Location
    (Top Secret)
    Posts
    5,258
    Feedback
    20 (100%)
    GLWS, have one of these on mine. Absolutely awesome bit of kit.

    Answer not a fool according to his folly, lest thou also be like unto him.

  3. #3
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    Thanks and I agree, this really helped to put off my need for more power - well at least for a few years.

  4. #4
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    Bump and price dropped to 350 excluding postage

  5. #5
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    Bump

  6. #6
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    Bump

  7. #7
    Work... what work? Club Member
    Join Date
    Jan 2012
    Location
    England - Cheshire
    Posts
    178
    Feedback
    1 (100%)
    Will this work on my auto-manual conversion? I haven't replaced the loom

  8. #8
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    Quote Originally Posted by mikeekim89 View Post
    Will this work on my auto-manual conversion? I haven't replaced the loom
    The following link shows the differences between the wiring of an auto and manual 2JZ GE ECU (the blue text is for the auto functions). I am not 100% sure if the pins for the auto only terminals are present on the manual ecu's but to be honest it would be easy to just depin these terminals from the loom connector if you haven't already done so. Pins 76 and 77 should be connected together which it looks like this must be done as part of the conversion anyway? I would therefore be reasonably confident that it would work.

    http://wilbo666.pbworks.com/w/page/4...ngine%20Wiring

  9. #9
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    bump

  10. #10
    I'm a newbie. Club Member mc92's Avatar
    Join Date
    May 2014
    Location
    England - Hertfordshire
    Posts
    592
    Feedback
    1 (100%)
    How much would you want for postage to SG8? I may be interested when I next get paid
    1997 NA5.

  11. #11
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    I think postage with royal mail special delivery (which includes upto 500 compensation for theft or damage) would be just over 10 - so would make it 360 including postage

  12. #12
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    bump

  13. #13
    I can post! Club Member Sooty's Avatar
    Join Date
    May 2013
    Location
    England - Avon
    Posts
    82
    Feedback
    0
    bump

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •