Members banned from this thread: RobD, ray007, suprageek, zach42o1, Caesard, msmile, Reyft, Sausage and Dzowani


Results 1 to 5 of 5

Thread: 1UZ-FE V8 conversion for Supra

  1. #1
    Me? Post? Never! Club Member Konrad's Avatar
    Join Date
    Oct 2006
    Location
    England - West Midlands
    Posts
    4,500
    Feedback
    34 (100%)

    1UZ-FE V8 conversion for Supra

    I've got 1996 1UZ-FE engine and gearbox for sale, it was originally in Toyota Supra mkIV. ECU is no immobilizer one, mileage on this one is around 102k miles. It will come with almost everything to put it straight into Supra (except engine mounts and oil pan as I used them to my other project and I will give original 1UZ mounts and front oil pan with this lot). I will also add modified front part of propshaft, so no need to cut to measure, just connect it with original rear part of prop on Supra. Engine will also come with harness, so it will be more or less plug and play between engine and internal Supra loom.
    Timing belt, water pump, oil strainer have been done one year and 2000 miles ago. Starts and runs like it should be It's also decatted (first cats are replaced with decat pipes) and EGR is blanked off. Aircon pump is removed, but I will add it in sale. Pricewise I would like to get around 700 pounds for a lot.
    Who am I? By Tima - Metropolis.

  2. #2
    Me? Post? Never! Club Member Annabella's Avatar
    Join Date
    Feb 2016
    Location
    England - Lancashire
    Posts
    2,030
    Feedback
    0
    Maybe I don't know but that sounds cheap as it all comes together. Would make a good project! Glws.

  3. #3
    Work... what work? Club Member
    Join Date
    Dec 2013
    Location
    England - Kent
    Posts
    211
    Feedback
    0
    photos ?

  4. #4
    Me? Post? Never! Club Member Konrad's Avatar
    Join Date
    Oct 2006
    Location
    England - West Midlands
    Posts
    4,500
    Feedback
    34 (100%)
    Who am I? By Tima - Metropolis.

  5. #5
    Me? Post? Never! Club Member Konrad's Avatar
    Join Date
    Oct 2006
    Location
    England - West Midlands
    Posts
    4,500
    Feedback
    34 (100%)
    Also forgot to mention - brushes/bearing in alternator been changed, contacts in starter been changed too and there is new thermostat installed there
    Who am I? By Tima - Metropolis.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •