Members banned from this thread: RobD, ray007, suprageek, zach42o1, Caesard, msmile, Reyft, Sausage and Dzowani


Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: Supra Wheel Hub Sensors

  1. #1
    Work... what work? Club Member
    Join Date
    Feb 2010
    Location
    England - Dorset
    Posts
    119
    Feedback
    0

    Supra Wheel Hub Sensors

    I need 4 new wheel hub sensors and they're no longer available from Toyota and our club traders don't have any either.
    Is there a cross-over part from another make/model that fits the Supra and if so, can you give me details please ?
    Thank you, ARPUS ( Steve )

  2. #2
    Got the shiny bug. Club Member ripped_fear's Avatar
    Join Date
    Feb 2010
    Location
    England - Hampshire
    Posts
    14,552
    Feedback
    95 (100%)
    Are you referring to the abs sensors if so they are still available srd supplied and fitted mine

    Sent from my G3121 using Tapatalk
    I went from a 220bhp Sapphire Cosworth > Supra TT BPU circa 400 BHP......................BUt dont worry I had plenty of experiance on Mario Kart -scotty71
    If you were an engine would you like JP as your owner:-)? I'd report him to the RSPCE (Royal Society of Prevention of Cruelty to Engines).-Chris Wilson
    That was SupraPond 2010. WaspyPod was a corker, never seen to many wasps in one place.-Branners
    I am bad, but then I'm not a moderator....Im so much more.-Branners
    You are bloody nuts. Nothing comes close dude, what the hell would you replace it with? A GTR, that's like going from Kiera Knightley to Susan Boyle.-Supra Gaz

  3. #3
    Posting is my life! Club Member evinX's Avatar
    Join Date
    Sep 2009
    Location
    England - Northamptonshire
    Posts
    5,942
    Feedback
    28 (100%)
    The pre facelifts are discontinued and facelifts are available. Difference is the bracket that was metal is now plastic. Iirc.

  4. #4
    Work... what work? Club Member
    Join Date
    Feb 2010
    Location
    England - Dorset
    Posts
    119
    Feedback
    0
    Quote Originally Posted by ripped_fear View Post
    Are you referring to the abs sensors if so they are still available srd supplied and fitted mine

    Sent from my G3121 using Tapatalk
    I'm not technically minded ripped_fear.
    The garage working on my car, told me about the sensors.
    I'll contact them and get more details.
    My car is a UK spec auto, if that helps.
    Thanks for your advice.

  5. #5
    Work... what work? Club Member
    Join Date
    Feb 2010
    Location
    England - Dorset
    Posts
    119
    Feedback
    0
    Quote Originally Posted by ARPUS View Post
    I'm not technically minded ripped_fear.
    The garage working on my car, told me about the sensors.
    I'll contact them and get more details.
    My car is a UK spec auto, if that helps.
    Thanks for your advice.
    They are ABS sensors ripped_fear and Lee at SRD has got them, as you said.
    Thanks a lot for your help.
    Steve

  6. #6
    Got the shiny bug. Club Member ripped_fear's Avatar
    Join Date
    Feb 2010
    Location
    England - Hampshire
    Posts
    14,552
    Feedback
    95 (100%)
    Quote Originally Posted by ARPUS View Post
    They are ABS sensors ripped_fear and Lee at SRD has got them, as you said.
    Thanks a lot for your help.
    Steve
    No problem mate glad you got it sorted.

    Sent from my G3121 using Tapatalk
    I went from a 220bhp Sapphire Cosworth > Supra TT BPU circa 400 BHP......................BUt dont worry I had plenty of experiance on Mario Kart -scotty71
    If you were an engine would you like JP as your owner:-)? I'd report him to the RSPCE (Royal Society of Prevention of Cruelty to Engines).-Chris Wilson
    That was SupraPond 2010. WaspyPod was a corker, never seen to many wasps in one place.-Branners
    I am bad, but then I'm not a moderator....Im so much more.-Branners
    You are bloody nuts. Nothing comes close dude, what the hell would you replace it with? A GTR, that's like going from Kiera Knightley to Susan Boyle.-Supra Gaz

  7. #7
    Work... what work? Club Member
    Join Date
    Feb 2010
    Location
    England - Dorset
    Posts
    119
    Feedback
    0
    Quote Originally Posted by ripped_fear View Post
    No problem mate glad you got it sorted.

    Sent from my G3121 using Tapatalk
    There was a misunderstanding and Lee at SRD does not have any ABS sensors, so I'm still searching for them.
    Can anyone help please ?

  8. #8
    Got the shiny bug. Club Member ripped_fear's Avatar
    Join Date
    Feb 2010
    Location
    England - Hampshire
    Posts
    14,552
    Feedback
    95 (100%)
    Quote Originally Posted by ARPUS View Post
    There was a misunderstanding and Lee at SRD does not have any ABS sensors, so I'm still searching for them.
    Can anyone help please ?
    ah mate that sucks. Good luck on your search

    Sent from my G3121 using Tapatalk
    I went from a 220bhp Sapphire Cosworth > Supra TT BPU circa 400 BHP......................BUt dont worry I had plenty of experiance on Mario Kart -scotty71
    If you were an engine would you like JP as your owner:-)? I'd report him to the RSPCE (Royal Society of Prevention of Cruelty to Engines).-Chris Wilson
    That was SupraPond 2010. WaspyPod was a corker, never seen to many wasps in one place.-Branners
    I am bad, but then I'm not a moderator....Im so much more.-Branners
    You are bloody nuts. Nothing comes close dude, what the hell would you replace it with? A GTR, that's like going from Kiera Knightley to Susan Boyle.-Supra Gaz

  9. #9
    Posting is my life! Club Member Jellybean's Avatar
    Join Date
    May 2007
    Location
    Ireland
    Posts
    7,555
    Feedback
    6 (100%)
    Cody make Brackets to suit Digital Hall sensors , maybe an aftermarket speed sensor would fit ; I am sure other cars run a similar analogue speed sensor

    Try the Lexus SC400\430 , a number of suspension parts are compatible with a facelift Supra

    http://codyphillipsracing.com/store/...-sensor-front/

  10. #10
    Me? Post? Never! Club Member mwilkinson's Avatar
    Join Date
    Apr 2006
    Location
    England - Hampshire
    Posts
    4,261
    Feedback
    58 (100%)
    89545-14020 Rear RH
    89546-14020 Rear LH
    1996 Facelift J-Spec 6spd Single Turbo (600bhp) - Gunmetal
    Sold - 1995 Jspec 6 Speed Manual BPU (Lambo Grigio Avlon)

  11. #11
    Me? Post? Never! Club Member
    Join Date
    May 2009
    Location
    England - Shropshire
    Posts
    2,106
    Feedback
    0
    These guys are pretty good at tracking down hard to find parts at a decent price if there are any remaining in the official supply chain. They ship US Mail though so it usually takes up to two weeks for parts to arrive and then there is the RM handling charge (15) plus duty payment (4%) to consider.

    Rock Auto is showing available stock on the front pair of sensors.

    There are a few people here with spare sensors so if you plead with an attractive offer then someone may be prepared to part with their precious spares.

  12. #12
    Helpful Club Member Scooter's Avatar
    Join Date
    Aug 2002
    Location
    England - Surrey
    Posts
    10,016
    Feedback
    44 (100%)
    Quote Originally Posted by rider View Post

    There are a few people here with spare sensors so if you plead with an attractive offer then someone may be prepared to part with their precious spares.
    This is an issue! let me mull it over, why do you need all 4? Is it just that you want to refresh all at once? It's just that I've a feeling this is one of those parts that selling may bite me on the arse down the line.
    Number 8 ...........doing my best to keep
    Number 9 ........been and gone!
    Number 10 ........on its way

  13. #13
    Helpful Club Member Scooter's Avatar
    Join Date
    Aug 2002
    Location
    England - Surrey
    Posts
    10,016
    Feedback
    44 (100%)
    Quote Originally Posted by mwilkinson View Post
    89545-14020 Rear RH
    89546-14020 Rear LH
    On Amayama these 2 come up at 175, so you could possibly try them, there is a get a quote option so they come back to you re availability after 48 hrs or so, so no harm in trying?
    Number 8 ...........doing my best to keep
    Number 9 ........been and gone!
    Number 10 ........on its way

  14. #14
    Work... what work? Club Member
    Join Date
    Feb 2010
    Location
    England - Dorset
    Posts
    119
    Feedback
    0
    Quote Originally Posted by Scooter View Post
    This is an issue! let me mull it over, why do you need all 4? Is it just that you want to refresh all at once? It's just that I've a feeling this is one of those parts that selling may bite me on the arse down the line.
    All 4 sensors broke when the hubs were being restored Scooter.
    I understand this often happens, as they are very brittle.
    Are your sensors new, or used and would you be interested in selling them? ( price ?)
    I've spent thousand of pounds on my car recently and the sensors are the only thing preventing the garage returning my car to me.
    I'm going to post a story with photos when I get the car back, as I know most club members like that kind of thing.

  15. #15
    Work... what work? Club Member
    Join Date
    Feb 2010
    Location
    England - Dorset
    Posts
    119
    Feedback
    0
    Quote Originally Posted by evinX View Post
    The pre facelifts are discontinued and facelifts are available. Difference is the bracket that was metal is now plastic. Iirc.
    Chris Wilson just emailed me and said the same as you evinX.
    Do you or any other member, know that they fit?
    He said the post facelift sensors have a different part number and should fit, but that I should check whether they do, with club members.
    Does anyone know the 4 different part numbers?
    Last edited by ARPUS; 05-06-18 at 11:54.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •