WIDESUPRA Posted January 21, 2018 Share Posted January 21, 2018 Am looking for a manual mk4 prop shaft If you have one please let me know Thanks Link to comment Share on other sites More sharing options...
Mk4Gaz Posted January 21, 2018 Share Posted January 21, 2018 W58 or v160/v161? Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 21, 2018 Author Share Posted January 21, 2018 W58 QUOTE=Mk4Gaz;4255041]W58 or v160/v161? /QUOTE] Link to comment Share on other sites More sharing options...
Mk4Gaz Posted January 22, 2018 Share Posted January 22, 2018 I think I may have a spare one kicking around, I'll check tonight for you Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 22, 2018 Author Share Posted January 22, 2018 Cool let me know I think I may have a spare one kicking around, I'll check tonight for you /QUOTE] Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 23, 2018 Author Share Posted January 23, 2018 Bump any have a manual prop shaft for mk4 supra? Link to comment Share on other sites More sharing options...
Mk4Gaz Posted January 23, 2018 Share Posted January 23, 2018 Ive just checked what I've got. I bought a na auto, and na manual prop back in the summer. I have one rear half which I believe are the same for both, and two front halves - one I believe is auto, the other manual. The carrier bearing can simply be swapped over if the one its fitted to is incorrect. I could send you all the pieces for £100 posted. The only thing missing, are two of the bolts that hold the two halves together If you can confirm what the correct total length for a na5 prop is, I can double check for you Not sure if this helps? Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 23, 2018 Author Share Posted January 23, 2018 I think the rear are the same but the manual front is bit bigger then the auto i have been told but 100% sure lol Link to comment Share on other sites More sharing options...
Mk4Gaz Posted January 23, 2018 Share Posted January 23, 2018 Yeah, of the two front halves, one is slightly longer than the other (about 20mm) I can't say for sure which is which, they've been buried in the garage for months! Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 25, 2018 Author Share Posted January 25, 2018 Am going to find out the measurements for the manual prop. Link to comment Share on other sites More sharing options...
Mk4Gaz Posted January 25, 2018 Share Posted January 25, 2018 Tell you what, how about I box up what I've got, send it to you for the cost of the postage, and if its no good then send it back, and if it works, just send me the balance? Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 26, 2018 Author Share Posted January 26, 2018 So the manual front half should be few size smaller then auto. If you could measure it and let me know. Hope this helps Thanks Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 26, 2018 Author Share Posted January 26, 2018 All the w-58 driveshaft front sections I have measure 2.550 inch ( 64.77mm) and the auto drive shaft measures 2.950 inch ( 74.93mm). Link to comment Share on other sites More sharing options...
WIDESUPRA Posted January 28, 2018 Author Share Posted January 28, 2018 Bump anyone have a manual prop shaft?? Link to comment Share on other sites More sharing options...
Recommended Posts