Jump to content
The mkiv Supra Owners Club

Style's 6spd NA-T - CCW's


Style
 Share

Recommended Posts

After many years of being an NA-T lurker around these parts and trying to learn the ins and outs, I've finally bit the bullet and started piecing a build of my own together. I've tried to prepare the car in other areas first before starting the build with UK brakes all round and a Chris Wilson uprated 6spd clutch to handle the power of a small single setup. Having a facelift SZ-R meant I also had the V161 so no need to worry there.

 

Spec

 

Whifbitz Log Style T4 304 s/s Manifold

Borg Warner S360 T4 0.88 Undivided Turbocharger

Whifbitz Oil Drain kit with billet oil drain flanges

Whifbitz Oil Feed kit

Goodridge braided hoses and fittings

Greddy Intercooler

Greddy BOV

Aluminium Intercooler pipework

Silicon Intercooler pipes and clamps

Turbosmart Compgate 45mm External Wastegate

Siemens 650cc DEKA injectors

Walbro 255lph Fuel Pump

Whifbitz 3” s/s Downpipe

Whifbitz 3” s/s Midpipe

Borg Warner 3” Marmon Clamp

Stainless Steel Dump Tube venting to atmosphere

K&N 4” Air Filter

Polished aluminium Intake Pipe

NGK iridium Spark Plugs

AEM EMS V2 Standalone ECU c/w 3.5bar Map Sensor, Intake Sensor and Base Map

Defi Link Meter

Defi Inlet Pressure Gauge

Defi Boost Gauge

Defi Fuel Pressure Gauge

Defi Oil Pressure Gauge

Defi Oil Temp Gauge

AEM AFR Gauge

UK Brakes all round

Chris Wilson uprated TT 6spd Clutch

 

Car has just had a major service with all belts, plugs, filters and fluids changed throughout so should be healthy. Hopefully this kit will see me to 400hp or there abouts to begin with. Future plans include TT pistons, bigger injectors, uprated fuel system, rad & twin fan upgrade, oil and P/S coolers, FFIM etc etc. Will slowly up the boost over time as I will no doubt crave more and more :sly:

 

Don't have any pics of the build as I'm offshore but I know this forum likes pics so here is the car that will undergo all this work:

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=184345&stc=1&d=1398536963

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=184343&stc=1&d=1398536963

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=184346&stc=1&d=1398536963

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=184344&stc=1&d=1398536963

156458_436972829661373_1559109284_n.jpg

523394_117812201701272_558376034_n.jpg

551711_455481571146349_1908133150_n.jpg

1486312_707585032594162_28232897_o.jpg

Edited by Style
Title Change (see edit history)
Link to comment
Share on other sites

  • Replies 172
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Wow car looks great. Good luck with your build. Will be watching this one!

 

Cheers dude, progress will be slow to begin with but once I'm home the parts should at least be there waiting for me :D

 

Looking good mate! Who is going to build it?

 

Thanks Jesse, sending the car back to Checkpoint in Arbroath for the build. Certainly knows his Supras and has a good mapper to get the car running. I'll need a fellow NA-T'er up north so get on it!

 

Bout time Steve :p :p can't wait to watch this getting built

 

Haha good year or so late but hey ho :p Hopefully won't miss too many summer events with the bad timing!

Link to comment
Share on other sites

Thanks Jesse, sending the car back to Checkpoint in Arbroath for the build. Certainly knows his Supras and has a good mapper to get the car running. I'll need a fellow NA-T'er up north so get on it!

 

Sounds good! Will be watching with interest as if I do go the NA-T route then need somewhere good to send the car. Hope the build goes well and look forward to seeing it complete! :thumbs:

Link to comment
Share on other sites

Sounds good! Will be watching with interest as if I do go the NA-T route then need somewhere good to send the car. Hope the build goes well and look forward to seeing it complete! :thumbs:

 

I'll try keep the thread as detailed as possible dude and hopefully Checkpoint can do the business without any hassle. Calum knows his stuff so confident they'll be able to build me a solid setup!

Link to comment
Share on other sites

  • 1 month later...

Well I got back from offshore work today and was keen to see what was waiting for me!

 

AEM AFR Gauge

attachment.php?attachmentid=186586&stc=1&d=1401656224

 

GReddy Type RZ BOV

attachment.php?attachmentid=186587&stc=1&d=1401656224

 

440cc MKIII Injectors with resistors from Fly, thanks again buddy

attachment.php?attachmentid=186590&stc=1&d=1401656224

 

AEM EMS V2 Standalone ECU. Hoping to have some fun with the features on this. Going to see what I can do with regards to running it through my CarPC and engaging launch control, 2 step and stuff like that

attachment.php?attachmentid=186589&stc=1&d=1401656224

 

Some more Defi Gauges, still waiting on one more as it appears to have gone walkies in the postal network

attachment.php?attachmentid=186588&stc=1&d=1401656224

 

Greddy Intercooler and some 3" pipework to go with. Will be going black silicone all through out if I can manage

attachment.php?attachmentid=186581&stc=1&d=1401656194

 

attachment.php?attachmentid=186583&stc=1&d=1401656194

 

Oil sandwich plate and OEM 6spd knob to replace my cheap one

attachment.php?attachmentid=186584&stc=1&d=1401656194

 

Also some gaiters to spruce up the interior. Hoping to get the gear knob and maybe even my steering wheel done to the same effect

 

attachment.php?attachmentid=186582&stc=1&d=1401656194

 

And because I'm a bit of a tech geek I couldn't resist picking this up for some good footage at shows etc

 

attachment.php?attachmentid=186585&stc=1&d=1401656194

 

Finally, Metalmonkey have been at work designing me some gauges to match the style of my Defis. Hecklers PCB dash has also been installed so should match up nicely :D

 

attachment.php?attachmentid=185596&d=1400101725

 

Pay day is a few weeks away so will be looking to pick up the Whifbitz NA-T kit soon and complete the puzzle!

Intercooler.jpg

Leather Bits.jpg

Piping.jpg

Sandwich Plate Gear Knob.jpg

Multimedia Nerd.jpg

AFR.jpg

BOV.jpg

Defi Gauges.jpg

ECU.jpg

Injectors.jpg

Link to comment
Share on other sites

Those dial's looking good. Should post some pictures up when they arrive.

 

Good luck with your build :)

 

Cheers Dim :) I'll get some up once I have them fitted, hoping they match up quite close.

 

i have that exact BOV but it doesnt seem to do anything! i have turbo chatter but cant seem to hear anything from this

 

Maybe need to have a play with it mate? It has a hard/soft setting on it so maybe need to adjust that to get it to release. What you running? TT? BPU?

 

Nice presents to come back to Steve :D just get the main part and your sorted :p

 

Sure are :D Hopefully get that order in by the end of the month then the real fun begins!

Link to comment
Share on other sites

  • 1 month later...

Few updates for this build. Managed to get my Defi style dials fitted over the weekend. Got a few pictures but they never came out well at all :( It looks much better in the flesh believe me! Will try get a video of the Red Line feature on Heckler's LED's as well :cool:

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188871&stc=1&d=1406034170

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188872&stc=1&d=1406034170

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188873&stc=1&d=1406034170

 

Also made the trip down to Ingleston with the rest of the Scottish lads for the Scottish Car Show. Cracking weather and some lovely Sups on display. There's hundreds of pics doing the rounds on Facebook, I only managed 2 :D

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188874&stc=1&d=1406034490

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188875&stc=1&d=1406034490

photo 1.jpg

photo 2.jpg

photo 3.jpg

photo 4.jpg

photo 5.jpg

Edited by Style (see edit history)
Link to comment
Share on other sites

Got a present through from Paul as well, think I have everything gathered now for the build. Will just need to try and sort a date for fitting and mapping :)

 

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188877&stc=1&d=1406034683

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188878&stc=1&d=1406034683

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188879&stc=1&d=1406034683

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188880&stc=1&d=1406034683

 

Also picked up a Walbro Fuel Pump from here last week so have that to add to the build as well

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=188876&stc=1&d=1406034683

 

 

I've done a few other bits and bobs as well such as heat wrapping the downpipe, fitted my OEM 6spd gear knob and some of the leather covers I picked up so will get pics of them tonight hopefully and up for you all to see. Gonna put the car through an MOT before I carry out the work as it is due next month. Not sure what will happen with regards to emissions etc so MOT it now and worry about that in a years time :D

 

- - - Updated - - -

 

Cool project, matey. :)

 

Watching to see how she turns out... :Popcorn:

 

Cheers dude, hoping it'll be a good 'un!

photo 1(1).jpg

photo 2(1).jpg

photo 3(1).jpg

photo 4(1).jpg

photo 5(1).jpg

Link to comment
Share on other sites

Nice one Style, sorry I didn't get a chance to say hi, the joy's of turning up before everyone else :D

 

Cheers Sunny. Yeah sorry I missed ya too, only spotted you once the whole day. Car was looking good though and got a real good nosey. First time I've seen RSP in the flesh, lovely colour

Link to comment
Share on other sites

No way you arrived before anyone else :p :p

 

Looking good Steve, can't wait to see this come together now :D

 

I actually read that as arriving 'after' everyone else, only just noticed my mistake! Looking forward to some boost now Bear, just hope I don't get the power bug! :p

Link to comment
Share on other sites

Added another few bits to the build which will be getting under way in the next few weeks after the MOT. Picked up an AEM Boost Control Solenoid so I can have a few maps of variable boost. Since I still have the Active Spoiler switch I'm thinking about sanding that down and getting 'Hi' and 'Lo' put on the buttons and 'Boost' where it says 'Spoiler' next to the little light. I can then wire that into the ECU which will give me a high and low boost setting. High boost will bring on the little light one the switch, that's my thinking anyway. Just need to get the pin outs from the switch and see if I can make it happen :)

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=189057&stc=1&d=1406639632

 

Also picked up an FPR from Dazzi and a Fuel Pressure Gauge from Glanza_Mike. Ordered the gauge sensor from the states which will just plumb into the FPR I reckon. It has a little gauge on it so will just remove that and use the Defi one instead. Pics will follow when the parts arrive.

 

Speaking of gauges, I'm currently looking into mounting my gauges on the a-pillar. Since I now have 3 I'm gonna try and go down the same route as Andrew K, love the way his looks. I had ordered a 2 gauge pod off eBay but the guy has mucked me about and I reckon I've been mugged of 50 bucks. But you live and learn I guess. Should have everything to do the new idea so won't cost me at least

SpoilerSwitch.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Car goes in for it's MOT tomorrow, needed a new tyre so a new Potenza will go on before they test it. Provided the car passes, I'll just be leaving it there to get the conversion done! :) I'm going on holiday on Tuesday so will hopefully pick it up again the following week.

 

All Defi's are wired in for power, just need the sensors run. AFR still needs power and wiring too but since it's going to the AEM ECU I'll leave the splicing to the garage.

 

PS. Looks like I better dim the actual dash lights from that pic :D

 

http://mkivsupra.net/vbb/attachment.php?attachmentid=189500&stc=1&d=1407506337

photo.jpg

Link to comment
Share on other sites

MOT passed and all parts have been dropped off. Will pick it up when I return with hopefully a doubled power figure!

 

Vids and pics when I pick it up....all going well. Will see if 3" pipework does actually pass the oil feed on the turbo

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.