Page 1 of 35 1234511 ... LastLast
Results 1 to 15 of 523

Thread: Andrew`s Single turbo 6 speed V161 Build

  1. #1
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)

    Andrew`s Single turbo 6 speed V161 Build

    Been putting this off for a long time now but thought id finally start a thread on what i`m doing. and also keep a documentation of everything that gets done on the supra.

    Here is a thread I started a while ago now showing what I had done regarding the spoiler, Bonnet, front active Spoiler and stereo install. http://www.mkivsupra.net/vbb/showthr...ne-on-my-supra

    This is where i am now and i don`t want to go over the top or to mad with my build at the moment! i have been gathering and collecting bits for some while now and still have a huge list of bits to get! getting there slowly though. Over the last year and a bit i`ve been working on a TT bottom end & head that i purchased from Jamesy`s supra when he was breaking it, thought this would be a good starting base as Jamesy's engine had been previously built by SRD and only covered roughly 1800 miles since. I also got myself a doner car which i`ve been taking parts of that i need and getting them all cleaned up and selling what i don`t need. I`m also going to be swapping out the auto box for a 6spd V161 conversion which i purchased from keron at extreme performance and this is all ready and waiting to go in the car now, the box had done 59651 miles and was taken from a 97 model supra which had minimal damage and started & drove well also.

    Added a picture of the supra that will be getting all these goodies fitted one day!
    The car is an N/A Auto at the moment so gonna be a challenge!

    This is my list of parts i have & i`ve done so far and will update as i go on,
    I`ll keep you all updated and start adding some pictures of my progress so far.
    When it comes to fitting it all to the car Lee & the team at SRD will be doing all that side of things so
    Looking forward to when that starts.

    Engine spec so far :-

    ARP Head studs
    ARP Rod Bolts
    ARP Main Bolts
    ACL ROD Bearings
    ACL Main Bearings
    ACL Thrust Washers
    New Uprated Rings
    OEM Rods and Pistons
    Fully Balanced and Line Honed block
    SRD Stage 2 Head - Ported and Polished
    HKS Cam pulleys
    SRD Stage 2 Cams 269 Profile, 9.6mm Lift
    Brian Crower Uprated springs
    Titanium Retainers
    Welded crank timing sprocket
    Gates Racing Uprated blue cambelt
    New Toyota cambelt tensioner
    New Toyota cambelt tensioner pulley (also using a Whifbitz Billet Cambelt Bracket)
    TRD thermostat
    SRD polished top water neck with custom -24 AN fitting
    N/A lower water neck (Helps with clearance because of Turbo)
    -24 AN Top braided water neck
    SRD custom cam cover Breather kit with -12 AN fittings
    -12 AN Cam cover mods
    Pre-facelift engine mounts
    TRD Engine Mounts
    TRD Oil filler cap
    TTC Performance oil dipstick
    SRD Aluminium Undertray
    Lexan spark plug cover
    Front upper and lower engine covers painted silver
    Metallic sump plug
    New OEM Oil filter
    New Toyota oil pump
    New OEM water pump
    New OEM starter motor
    New Genuine Toyota crank pulley
    New coil pack clips
    New OEM throttle cable for manual turbo supra

    Turbocharger & Induction :-

    Precision T6765 .68 (67mm Turbo with .68ar)
    Whifbitz Tubular Manifold
    Whifbitz 3" Mid / Down pipe
    50mm Turbo smart wastegate
    HKS Dump Valve
    4" Polished Intake pipe
    4" K&N Filter

    Exhaust System :-

    3" HKS Silent Hi-power

    Drivetrain :-

    V161 6 speed getrag conversion
    Stock dual mass flywheel
    Spec stage 1 clutch
    Large casing LSD from a 6speed manual (B03B)
    New Toyota Prop Shaft
    Whifbitz Solid shifter mounts
    TRD Gearbox mount

    Cooling :-

    Chris Wilson SMIC
    New OEM Toyota air diverter
    Garage Whifbitz SMIC hard pipe kit
    Mocal Engine oil cooler kit with Thermostatic oil sandwich plate
    Fluidyne Alloy radiator with custom -24 AN fitting
    ARP carbon rad plate

    Fuel, Tuning & Ecu :-

    Syvecs S6 ECU
    Fuel rail adaptor
    SARD 800cc Drop in injectors
    Aeromotive FPR
    New Toyota fuel filter
    Walbro 485 fuel pump

    Suspension, Wheels, Tires & Brakes :-

    Tein coilovers
    Cusco strut brace
    TT Front Anti roll bar
    AP Racing big front brake kit
    356mm discs on the front
    Blitz techno speed Z1's 9x18 front & 10x18 rear
    Goodyear eagle F1 tyres all round

    Interior & Ice :-

    Alpine CDA - 9854R stereo
    Alpine KCA - 420i interface adaptor for ipod
    Front speakers - JL Audio C2 - 650 Evolution 2 - way components
    Rear speakers - JL Audio Evolution TR 650 - CXi
    Caliber CA660 Competition series II 6 channel amplifier
    lockys96 custom sub-box with a JL Audio 10" sub-woofer driver
    konig K5000 seats (Black & Silver)
    Toyota supra fitment sub frames
    Re-trimmed Oem steering wheel
    New Oem 6 speed leather gear knob
    New Oem leather hand brake
    Original Black carpet
    Black Head lining, Sun visors & interior light fitting
    Dash panels painted silver to match the silver on the seats
    Top Secret gauge pod
    Custom made 2 gauge pillar pod
    Defi control unit2
    60mm defi boost gauge
    60mm defi oil pressure
    60mm defi water temp
    60mm defi fuel pressure
    60mm defi EGT
    AEM AFR Gauge

    Exterior :-

    TRD spoiler
    Original UK Spec bonnet & air scoop
    Custom made under bonnet air diverter for the air scoop
    Full OEM front active spoiler with manual override device fitted
    S2000 stubby conversion aerial kit
    Zunsport front grill set
    Facelift headlights
    Facelift front indicators
    Clear side indicators
    OEM Front small mud flaps


    Attached Thumbnails Attached Thumbnails My edit supra pics 024.jpg  
    Last edited by Andrew K; 10-04-17 at 19:19.

  2. #2
    SRD Project Auto Club Member Chris Bailey's Avatar
    Join Date
    Jan 2012
    Location
    England - Essex
    Posts
    8,353
    Feedback
    1 (100%)
    Nice spec list! What sort of power you aiming for?

    The only thing I would change is maybe the injectors, Becuase if your going for a big single with big power your going to want 1000cc injectors to feed enough fuel
    Life is like a camera...
    Focus on what's important,
    Capture the good times,
    Develop from the negatives,
    And if things dont work out,
    Take another shot.

  3. #3
    Money Laundering Club Member johnny g's Avatar
    Join Date
    Jan 2008
    Location
    England - Merseyside
    Posts
    12,929
    Feedback
    20 (100%)
    Quote Originally Posted by Chris Bailey View Post
    Nice spec list! What sort of power you aiming for?

    The only thing I would change is maybe the injectors, Becuase if your going for a big single with big power your going to want 1000cc injectors to feed enough fuel
    800 should be enough for 700bhp or thereabouts, possibly more. Overspeccing injectors is pretty common these days, it hurts idle/offboost driving IMO
    Johnny - Twitter - Blog - Web Design
    2017 Nissan GT-R, Recaro Edition in Daytona Blue. Litchfield Stage 4.5, 755bhp, 641lb/ft - Alcon Superkit - Magic Air Freshener

  4. #4
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    these are the TT cam covers i had cleaned up fittings welded on and then powder coated black.







    Attached Thumbnails Attached Thumbnails my supra project parts 064.jpg   my supra project parts 063.jpg   my supra project parts 067.jpg   my supra project parts 071.jpg  
    Last edited by Andrew K; 26-05-14 at 17:47.

  5. #5
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    Quote Originally Posted by Chris Bailey View Post
    Nice spec list! What sort of power you aiming for?

    The only thing I would change is maybe the injectors, Becuase if your going for a big single with big power your going to want 1000cc injectors to feed enough fuel
    only looking to be around the 600 mark really, well i hope anyway

  6. #6
    SRD Project Auto Club Member Chris Bailey's Avatar
    Join Date
    Jan 2012
    Location
    England - Essex
    Posts
    8,353
    Feedback
    1 (100%)
    Quote Originally Posted by Andrew K View Post
    only looking to be around the 600 mark really, well i hope anyway

    Ahh the 800 drop in injectors will be fine then
    Life is like a camera...
    Focus on what's important,
    Capture the good times,
    Develop from the negatives,
    And if things dont work out,
    Take another shot.

  7. #7
    Money Laundering Club Member johnny g's Avatar
    Join Date
    Jan 2008
    Location
    England - Merseyside
    Posts
    12,929
    Feedback
    20 (100%)
    Quote Originally Posted by Andrew K View Post
    these are the TT cam covers i had cleaned up fittings welded on and then powder coated black.
    Very nice that mate. Great spec list for a streetable car. You going to try something like a GTX35R?
    Johnny - Twitter - Blog - Web Design
    2017 Nissan GT-R, Recaro Edition in Daytona Blue. Litchfield Stage 4.5, 755bhp, 641lb/ft - Alcon Superkit - Magic Air Freshener

  8. #8
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    Quote Originally Posted by johnny g View Post
    Very nice that mate. Great spec list for a streetable car. You going to try something like a GTX35R?
    Thanks
    At the moment im going to use a Precision T6765 .68 Turbo on a Whifbitz Tubular Manifold And Whifbitz 3" Mid / Down pipe.
    Last edited by Andrew K; 02-06-13 at 12:35.

  9. #9
    Money Laundering Club Member johnny g's Avatar
    Join Date
    Jan 2008
    Location
    England - Merseyside
    Posts
    12,929
    Feedback
    20 (100%)
    That'll certainly do the job
    Johnny - Twitter - Blog - Web Design
    2017 Nissan GT-R, Recaro Edition in Daytona Blue. Litchfield Stage 4.5, 755bhp, 641lb/ft - Alcon Superkit - Magic Air Freshener

  10. #10
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    Cam covers back from powder coating, going with a black / silver & polished theme for the engine.



    Attached Thumbnails Attached Thumbnails my supra project parts 104.jpg   my supra project parts 105.jpg  
    Last edited by Andrew K; 26-05-14 at 17:49.

  11. #11
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    I also had the baffles cleaned up before fixing them back inside the cam covers. And before they were powder coated i drilled and tapped some new holes were they were riveted on before.







    Attached Thumbnails Attached Thumbnails my edit supra project parts 107 copy 9.jpg   my edit supra project parts 108.jpg   my edit supra project parts 110.jpg   my edit supra project parts 111.jpg  
    Last edited by Andrew K; 26-05-14 at 17:53.

  12. #12
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    Also had the ends of my strut brace and the fixings / brackets for the SMIC powder coated black while i was having the cam covers done, I've got a Chris Wilson SMIC which ill be using as don`t want to lose the working active spoiler.







    Attached Thumbnails Attached Thumbnails my supra project parts 094.jpg   my supra project parts 095.jpg   my supra project parts 096.jpg   my supra project parts 097.jpg  
    Last edited by Andrew K; 26-05-14 at 17:56.

  13. #13
    Me? Post? Never! Club Member thetrashcanman's Avatar
    Join Date
    Feb 2012
    Location
    England - Essex
    Posts
    2,556
    Feedback
    7 (100%)
    Looks nice this mate, sounds a very similar spec to what I want to do eventually look forward to seeing how you progress with this

  14. #14
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    My strut Brace, and gave it a polish.



    Attached Thumbnails Attached Thumbnails my edit supra project parts 099.jpg   my edit supra project parts 100.jpg  
    Last edited by Andrew K; 26-05-14 at 17:57.

  15. #15
    SRD600S Club Member Andrew K's Avatar
    Join Date
    Jan 2007
    Location
    England - Buckinghamshire
    Posts
    1,706
    Feedback
    25 (100%)
    Quote Originally Posted by thetrashcanman View Post
    Looks nice this mate, sounds a very similar spec to what I want to do eventually look forward to seeing how you progress with this
    Thanks, its taken me some time so far but im slowly getting there.

Page 1 of 35 1234511 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •