Jump to content
The mkiv Supra Owners Club

steve spedd

Club Members
  • Posts

    2060
  • Joined

  • Days Won

    1

steve spedd last won the day on February 23

steve spedd had the most liked content!

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

steve spedd's Achievements

Apprentice

Apprentice (3/14)

  • Dedicated
  • First Post
  • Collaborator
  • Posting Machine Rare
  • Conversation Starter

Recent Badges

41

Reputation

  1. I've got an R154 and all the associated parts if you are interested.... .
  2. Sorry to bump an old thread but I'm just wondering what a rolling shell would fetch in today's market? I have a TT6 (black) rolling shell with a welded in roll cage which is currently sat in primer, windows out apart from the front but would be supplied... Any ideas at all? thanks...
  3. steve spedd

    Engine!

    I've got a 2JZ (Ge) Bottom end available PM me if you are interested
  4. Afternoon All, Pics below, average condition £150 collected from Chesterfield S43 Same as this: https://www.upgrademotoring.com/performance/tanabe/supermed_exh.htm Thanks, Steve
  5. Afternoon All, Pics below, average condition £150 collected from Chesterfield S43 Thanks, Steve
  6. BACK AVAILABLE... £2,950.00 R154 Full conversion kit – Mkiv Supra 2JZ JZA80 Due to personal circumstances this lot is up for sale (going auto): · Mkiii Supra R154 box (good condition with no issues) · 1JZ/2JZ Genuine Bellhousing (RRP: $399 https://www.driftmotion.com/1JZ-2JZ-R154-Bell-Housing-p/dm3.htm) · 2No. cover plated for Bellhousing · Mkiv supra rear gearbox mount · New (never fitted) Mkiv Driftmotion R154/Mkiv rear gearbox mount (New RRP: $129.99: https://www.driftmotion.com/R154-Swap-Mount-Kit-MK4-SC-GS-p/dm2643.htm) · 1JZ Flywheel (suggest this is skimmed prior to use) · ARP Flywheel bolts · Shifter extended to suit MKiv transmission tunnel · Cube short shifter to suit the above · R154 Clutch fork and new pin (pin not shown in the photos) · Used Clutch slave cylinder · Propshaft (mates from R154 to Mkiv small diff) · Clutch master cylinder (used) · Clutch pedal and assembly (not shown in the photos) · Spec Clutch (Stage 3+) done about 1500 miles (RRP £735.70: https://www.garagewhifbitz.co.uk/spec-clutch-1590.html) · Xtreme Clutch (Stage 2) done about 20 miles (RRP: £538.80: https://www.driftworks.com/xtreme-clutch-for-toyota-supra.html) Other than the pipe from the clutch master cylinder to the clutch slave cylinder and a few bolts this is everything you will need to put the R154 into a Mkiv Supra… I’m after £3,250.00 £2,950.00 Collected from Chesterfield. Please take a good look at the photos and message me if you have any questions. I have this for sale else where so if it sell's then i'll remove this... Thanks, Steve
  7. Having said that I've seen the PHR Solid ones. These any good?
  8. Ok so I've had a look (with my eye David! ) And I'm pretty sure it's the engine mounts. Where is best to get some (I don't want solid)... Thanks in advanced
  9. Can i please take these: Front & rear Toyota Logo's plus Supra Badge - £55 PM on way
  10. It's a paddle clutch but did it before I changed that. I've ruled out the clutch and flywheel and once you've set of its fine. As usual you might be right Sir! I think it's one of these. Any way to test them? Visual inspection won't give me anything will it? Thanks for the reply. I do think it's leaning towards this. Anyone know where I can get a 1 piece prop for the R154 made? Would eliminate some issues!
  11. Evening All, After some advice/opinions if you would please... My gearbox went pop a few months ago and I think the clutch went at the same time so I've put a new clutch and R154 (second hand) in. When I pull off now there is a judder and a bit of noise. I appreciate that's a very poor description but any ideas what it could be? I'm thinking: Diff gone? Dodgy R154? Flywheel? Any advances on the above or agreement? Many thanks... Steve
  12. I've got one of these Available...
  13. Long shot but just wondering if anyone has one in their garage that they would like to part with... Let me know please. Many thanks, Steve
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.