Jump to content
The mkiv Supra Owners Club

k222bye

Club Members
  • Posts

    129
  • Joined

k222bye's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Collaborator
  • Dedicated
  • Conversation Starter
  • Week One Done

Recent Badges

0

Reputation

  1. Hi all Does anyone have a manual shift interior trim piece that goes on to the centre console? Ideally not brand new, happy to buy used as I plan on repainting it anyway.
  2. Update all. After extensive trouble shooting it turns out one cap leaked so badly it actually damaged through multiple layers of the Pcb. And despite replacing all caps and even attempting to repair the multi layer damage, i get an error code 31 when putting the ECU back in the car. So the car starts, and runs but runs really rough. I have tried to rebuild traces with copper and checked wiring at the ECU too but still get the error 31 ECU code. I successfully repaired the traction ECU, no problems with that as it tested OK in a friend's Auto TT, but sadly appears the ECU is a write off. FYI, removing the caps accelerated the damage to the eyelet hole but that was inevitable anyway as the components and PCB seemed to crumble away.
  3. So the absolute correct cap requirements for an Auto TT Supra are as follows : Auto ecu All caps are Nichicon high current capacitors (can be found on Farnell or DIGI key) 100 mf 10v x2 220 mf 10v x1 47mf 63v x2 10mf 50v x2 15mf x 35v (this one is on the second board that folds outwards) Traction ECU 47mf 63v 330mf 35v 100mf 10v 220mf 16v 820mf 35v 10mf 50v Total for these came to around £7 but direct shipping was 15 lol. Will post pictures during the soldering as well as what I used to make it easy.
  4. Hi all. I have had similar issues as described by OP. Caps in my Auto ECU and traction CONTROL ECU have both leaked. I am re soldering high current capacitors and replacing them so will let you if this solved anything. Cap ratings provided below for 7 caps in auto ecu for reference if anyone is interested or finds this useful in future. 100 mf 10v x2 220 mf 10v x1 47mf 63v x2 10mf 50v x2
  5. Hi I'm after a set of non Vvti valve covers. More specifically the intake side if possible. Appreciate any help. Hamzah
  6. Hi all After some headlight lenses, preferably new, I'm not sure how easy that will be or how numerous they are to come by but If anyone has any spares for sale please let me know. My plastic lenses have taken a battering. Cheers
  7. Toyota have been probing these questions again, so I have sent them the link to this thread. I hope the easy to make parts get churned out then attention can be diverted to parts which are more difficult to manufacture.
  8. Hi all After the intake valve cover for a non VVTI 2JZ GTE. Mine has cracked.
  9. Hey all If anyone has this piece of interior boot plastic laying about please let me know. I have attached a picture. I know its a long shot but im stuck as Toyota have discontinued the part [ATTACH=CONFIG]231165[/ATTACH]
  10. Hi all. Was wondering if anyone is selling an intact supra center console auto trim piece. The one which contains the ash tray.
  11. Does anyone know where i could get it welded from??
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.