phobos
Club Members-
Posts
132 -
Joined
phobos's Achievements
Newbie (1/14)
1
Reputation
-
Hi, looking for a replacement of one or two of my TTE Grand Stand wheels. So willed to buy a single wheel as well as a set of two. Must be in good condition, not welded or anything. Dimensions must be 10Jx18 with 40 mm offset (type AM 28139) Cheers!
-
Installation was pretty straight forward. I had to do a custom cross member though. If you buy the Whifbitz kit, you'll have a P&P solution. From a driving perspective I'm still in the tuning phase but I already love it. Upshifts on low-medium load are already quite nice but downshifts are a bit rough. I am still on an engine base map. My VE table is only usable up to 0.5ish bar of boost, hence I haven't tried any high load upshifts. Whenever I pull the paddle and get a smooth shift it puts a big smile on my face
-
On my LHD Supra I removed the plastic piece of the pedal, bent the pedal lever into the right position and put the plastic piece back on.
-
Haltech elite 2500 - JDM Supra - do I need my TRAC control ECU???
phobos replied to RZtwin's topic in mkiv Technical
That's exactly what I am doing on my Supra. I upgraded to 98+ ABS and will use the digital wheel speed outputs of the ABS ECU on the Elite for traction control. Just make sure to enable the internal pull-up resistors on the Elite. -
Hi, I am looking for a set of door cards in mint condition. Doesn't have to come with window switches handles or anything, just the plain cards will do. Thanks!
-
I read somewhere that a GM 12 bolt ring and pinion can be fitted to the big case Supra diff with some shimming. But I have no idea if that is true or just internet b/s.
-
Looking for a set of TRD sway bars. Let me know if anybody has a set for sale.
-
A rear one for the big case diff would be sufficient. The front auto part is quite easy to get.
-
Hi, does anybody have a UK/EU spec automatic transmission propshaft for sale? Thanks!
-
Hi, I'm after the cigarette lighter parts that are located in the dash panel. I have the actual lighter but the not the parts that are mounted to dash panel. If anybody has them in good condition... Thanks
-
Thanks! You mind posting some quick how-to on applying the covers?
-
Good job! Do you know if these can be used on LHD door cards as well? Are the left and right covers basically identical and just mirrored, or is there a difference in the window switch area?
-
Sweet! Some of the mods might be even counterproductive to spool and the effect of VVTi only might even be larger without them. I'm by no means saying that I don't like the final result, I'm just saying that the comparison is not showing the effect of VVTI only.
-
Since you changed the intake plenum as well, installed a heavier modified VVTi head and added 0.2 bar of boost it's comparing apples with pears unfortunately. Would have been nice to see the effect of VVTi only. The best way to do it would be to tune & dyno it with VVTi "disabled" (intake can at constant angle) and repeat the same with VVTi enabled & properly tuned I think.