Jump to content
The mkiv Supra Owners Club

Twin turbo

Followers
  • Posts

    62
  • Joined

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Twin turbo's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. For reference i also had the slip control blinking.Test with another ecu first.I had to recap trac ecu .Even if you open unit and caps looks good there are two big ones that are mounted directly to the board that are difficult to change and that make it almost impossible to see if they have been leaking.see if they have been changed.(maybe with a different colour or not situated directly on mother board anymore)
  2. Need to change rear lower suspension arms but it Looks like they are discontinued,so i am wondering if there are any good replacement that would fit without any issues and are of good quality. Its a Road legal car so the parts should be like oem ones.
  3. Is there a thread anywhere that shows which oem supra parts that have been discontinued.If not it would have been great if people add this to a sticky thread on technical,and maybe add other good replacement parts instead.just a thought:) As i understood oem parts will be discontinued by Toyota if no one buy them within 2 years.
  4. those repair books are from 93 and 97,and all bolts does have the same Toyota partnumber thru all years and models. Bolts are massive 12mm thick.
  5. Yes i agree with you but saw this link on ma 8http://www.mkivsupra.net/vbb/content.php?71-Maintenance
  6. Thats strange i got nothing like that on page ma 8 in my repair manual from 93,it is the usa version
  7. looks like a hexagon flange bolt 11 to me from picture i added,do you think thats correct
  8. Hi i had my supra in for control because of clunking noise.mecanic went over all those bolts holding sub frames.followed tourqe setting from repair manual but all those rear bolts bolts on the front suspension that show 53nm was tighted at least 175nm from before.the bolts seem so big and 53 NM seems so little for holding the subframe,can this be the correct setting.repair manual is for the us model and i have a jdm car,also Numbers of bolts does not seem to add up because there is one more in the manual when counting.
  9. Hi i got a oem 2JZ Engine ECU but most of the Toyota part number label is missing,only the denso part number 175700-5991 show .Does anyone know how to find out the Toyota part number for this unit.
  10. As i understood pro efi also have a very good standalone ecm made for supra that fully control the automatic and have advaced failsafe modes.anyone tried this with automatic?
  11. Maybe but it is very important that the right caps are used since 90% is chinese fakes out there.
  12. Here is a link if needed https://m.facebook.com/pg/LScowboyLS/about/?mt_nav=1 He will answer within hours every day and they give lifetime guarantee.they use the original caps needed.
  13. Would a ecu from Aristo 2jzgte with partnumber 89661-30560 would fit.talked with a guy that said he used this in his jdm 2jzgte supra.so what could be the difference.dont know if this item is still in stock though.
  14. Hi send hi-res pictures to (Lscowboyls) watch my thread. He usally answer very fast.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.