Jump to content
The mkiv Supra Owners Club

rob_sri

Club Members
  • Posts

    621
  • Joined

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

rob_sri's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Collaborator
  • Posting Machine Rare
  • Conversation Starter
  • Week One Done

Recent Badges

6

Reputation

  1. Hi all AEM V2 stand-alone ECU Part number 30-6101 Been ran on my NA/T for a few years but due to having a forged engine built I’m looking at changing as my builder prefers a different brand ECU to tune on If it doesn’t sell will continue to use this and look at other tuners! Capable stand-alone which has served me well Would prefer collection from near Tamworth, Staffs due to value but may consider other tracked/insured courier £800 ono
  2. ARP rod bolts brand new in sealed pack surplus to requirements after going forged pistons/rod which came with some! part number 203-6005 £100 located Nr Tamworth, Staffordshire
  3. Has anyone worked how to do this yet?
  4. Hi all, 2JZGTE Pistons, rods and ARP rod bolts for sale.. not sure how to price them to be honest but going off some previous ad’s.. £300 for pistons and Rods £350 with the ARP’s The rods have been removed from a 2JZGE and will come with good condition GE pistons too for whoever buys them!
  5. Hi all, bought these for my engine build and are now surplus to requirements. 2JZ rings - £120 ARP Rod bolts - £80 both brand new in sealed packaging will post both if required or collection from Lichfield area cheers Rob
  6. the original post was in 2018.. i would imagine they are sold
  7. This was brand new hard line from Toyota only a couple years ago and has only been replaced for a braided one due fitting a FPR amongst other things, the rubber hose at the end which goes to the tank isn’t new. Collection preferred from Hemel Hempsted due to length! Would be a nightmare to post Might be able to deliver within reason.. something can look into if required! Be a shame to bin it if can go to good use elsewhere £20
  8. Great condition as title comes with looms and bulbs. All clips etc intact, no damage or marks £prov sold
  9. I’m running a marlin crawler uprated R154 now so should be able to take a bit more Yeah I would agree, my build to start off with was very much budget.. XS with GReddy emanage and 5 years down the line I’m swapping for precision and AEM V2 among various other changes mainly to allow me to run more power but also for a safer build.. I think for a ~400bhp build you can get away with a lot. I’m glad though I went for the TiAL wastegate though as I didn’t want to risk an issue in that area But overall having covered 18k miles with two European road trips including the ring bang for buck is actually really good for a reasonably priced solution Like you say noz I’m sure spool is going to be better on the 6266 but it is 4x the price [emoji23][emoji23] mine shows no evidence of leaking though would be interesting to tear it apart properly and see how it looks inside That’s not the worst suggestion bracing it but I actually kind of want to leave it as it is and see if it needs it in the name of science haha!!
  10. Il be uploading some more pics of the parts as they come off also if that would be useful
  11. Hi all, Long time since I posted last but this could be useful to people going NA/T as choice seems to be quite restricted and this is my experiences with these XS products. overall I have seen and heard mixed reviews about XS but mainly the poor reviews are from people who haven't actually used their products my car has been converted from NA to Turbo for around 5 years now and i've had the following experience.. Turbo T61 Turbo was the T61 made good power 450BHP and 500lbft with probably a bit more to give but with a W58 gearbox attached to it 500lb ft was brave enough.. first turbo I had from them failed within a year and started to blow slightly (quite possibly down to a stupidly aggressive map it started life with and or bad luck) ..but after contacting their customer support they replaced it without much question and the replacement has been around europe twice and round the nurburgring with no issue on top of normal driving i've probably done around about 18k on this turbo without issue and is still serviceable now. I wouldnt say it spools like a more expensive turbo but certainly reliability and power in my case seems to have been pretty decent for a turbo that cost so little... Ive chosen to go for a 6266 now as it suits my more ambitious power goals but really bang for buck I really cannot fault this turbo at all. its been a scream and it costs around 285 quid delivered to the UK.. only over 800 cheaper than my new precision unit Downpipe This was one part of the kit that I did unfortunately have to mess around with.. granted this was 5 years ago so possible that they have made adjustments to it but the top needed to be clocked probably 20deg off where it was. Got a local exhaust shop to do this for me and the results were still a good fitting downpipe that overall cost alot less than getting it made from scratch.. granted it took a bit of messing about with that bit but its been heat wrapped and given death and shows no signs of failing and I will be continuing to use it! Manifold 1.9mm This is one of the first revisions of the XS manifold, i'm aware that some had issues with premature cracking in their earlier products prior to adding better bracing and materials this manifold though has certainly seen a fair amount of heat cycles and again for the money you can't really fault it. I have opted however to change this out with the 6266 for their newer revision and the 3mm thick one.. The 6266 is heavier than the T61 and probably more suited to the thicker manifold. the old manifold after 5 years of abuse was looking tired but overall with the milage i'm happy to retire it (plus i'm a bit of a tart and I wanted something that looks a bit more fresh to sit the new turbo on.) 3mm XS Manifold Placed the order for one of these today... so I will keep this thread updated with my thoughts, delivery, what it comes with etc and if I think the quality is worth the outlay and the differences between my old manifold and this one. I will be chopping the 4 bolt flange off and replacing it with a Vband but other than that will be making no modifications to it at all. in the mean time here is a pic of what i've ordered.. certainly looks more stocky than the old unit!
  12. Very good box this drives lovely best of luck with your sale josh
  13. thats for the twin turbo mate i'd have a go at wiring it yourself its not that bad when you get into it! failing that i'm sure there are people that can do it.. try asking on the supra NA/T facebook pages too
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.