alex341

Anyone done this? My brake lights, indicators, reverse lights and even headlights work but not the tail lights. Im pretty sure the tail lamp failure sensor is the cause of this. Just curious to see if it works before i buy a new sensor.

What are the availability on your pads Chris? Will order a set with you next weeks. Also does anyone know the part numbers for uk discs? My local dealer said they can do me a pair for £140 after I bit of discount

I was just worried about brake fade when braking from high speeds but if they're up to the job ill refurbish the ones I have. Can you recommended pads /discs or should I get genuine toyota?

Are these as good as people make out? I'm coming to the end of my single build and will be running around 600/650 hp. With decent pads and discs will uk brakes be good enough? I have this set up on my car but they are completely worn out and don't want to go through the expense of buying new discs and pads if I end up upgrading anyway.

What this guy said! I wouldn't let all the horror stories put you off, there are ways around the security issues. The power writer software isn't the same for all the versions of the f-con though. there should be a coloured round sticker onn the front of the unit to show which version it is, or you can be doubly sure by checking your serial number against the ones listed on the HKS Europe website. I also have the Hks wideband/knock sensor which I personally think makes for a great set up. This obviously is dependent of the price you will be paying for the fcon your interested in buying, I went down this route because I feel the f-con has a lot to offer (when you can use it) and can be purchased relatively cheap compared to other ecu's out there.

I tried before know one seems to have a copy

Probably been asked before but does anyone know where and if I could get my hands on the software for this? Its a pain in the ass because I've spent all winter getting my car ready and I'm itching to drive it but all the power writers I've checked with have around a 2 month waiting list for mapping.

Wow 10th may, that's come up quick! This will give me something to work towards, fingers crossed the car will be driveable by then. I'll tag on with Jon and Tim if that's cool as I don't really know anyone else yet.

Its the white one. Looking a bit sorry for itself at the moment mainly due to some not so desirable touches from the previous owner but I have every faith that it'll be worth it after Paul works a little magic on it and it gets a fresh lick of paint.

My car is currently at whifbitz south wales, Paul needs a seat in the car and as I need to make custom brackets for my new seats the brides are back in the car for the time being. As soon as I get the car back I will whip them out and put them up in the for sale section £400 for both seats and sub frames. These are direct replacement with no modifications needed.

I have recently bought new seats for my supra and will be looking to sell these when I get my car back from having some work done to it. They are genuine Brides with Bride seats frames specific for a supra. Everything is in good working order except for some bolster wear on the drivers seat caused by the awkwardness of getting in and out of the things! The seats are so comfortable I was originally going to get them re-trimmed and keep them but have since bought a set of fixed bucket seats (not quite so comfortable.) Can anyone shed any light on what they would be worth?

I have just priced one up and will hopefully be ordering it this week. These are the prices I had for the bits needed adapter loom £250 s6 ECU £1299 boost control solenoid £60 ntk o2 wideband sensor/loom £172 3 bar map sensor £120 syvecs cal switch £30 wideband knock sensor £80 syvecs oil pressure sensor £120 oil filter sandwich plate £20 which totals up to £2617.20 by the time you add the v.a.t. Hope this helps.

What about KSports? They seem to be well priced and look pretty decent

Are the copy ones all the Same? The only ones I can find in the uk are like http://m.ebay.co.uk/itm/230860559829?nav=SEARCH&sbk=1 Where as the cast finish ones found on the u.s eBay seem to look better?? http://m.ebay.com/itm/370967264074?nav=SEARCH&sbk=1

650 maybe a tad more