Jump to content
The mkiv Supra Owners Club

greenslade

Club Members
  • Posts

    42
  • Joined

greenslade's Achievements

Newbie

Newbie (1/14)

  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

2

Reputation

  1. It is really difficult, but it is possible. I had to change the plastic housing on one of mine as a van clipped and broke it. The hardest bit is compressing the spring on reassembly and fitting a replacement star washer thing. I used a valve spring compressor and perseverance. Good luck, Stephen
  2. Such a good idea - never thought of doing it that way. Thanks evinX!
  3. this happened to me - exactly the same. And I bought a new 2nd cat O2 sensor at great expense from Australia. Before it arrived, I posted on this forum and was put right i.e. being cat overheat sensor NOT O2 sensor. Anyway, that overheat sensor seems pretty difficult to get hold of, and I have reset the probe with metal epoxy putty. Seems OK so far but only 2 months ago and not many miles.
  4. evinX that's really kind of you. Right now fairly content to leave it as it is. However, if you come across the spare one I wouldn't say no to it as I could easily splice it into the existing wiring. If you do, and can bothered to post it, then I'll make sure you aren't out of pocket. Will dm my address if it turns up. Thanks for this offer Photo of the bodge Stephen
  5. Thanks Evinx and all others responding. Looks like the EGT sensor (89425-19505) is pretty difficult to source. Discontinued on all sites I checked. So will stick with the metal epoxy bodge for now. Good to know the bolts can come out with the right techniques though
  6. Actually, now I see it is an exhaust gas temperature sensor...or at least visually it looks to be comparing items in a Google search. Thanks guys!
  7. Thank you for all the answers. For now, I have secured and sealed it in place with Evostick metal epoxy. Obviously a bodge, but it seems to be OK for now. I ordered a replacement from eBay (automotivepartsspecialist), but after a few emails querying model etc they cancelled my order. Now one on the way from Australia (Zivor). I'm thinking, as others have said, that this isn't a critical sensor. Still not sure if it is an O2 sensor or an exhaust gas temperature sensor as Rider suggests! Anyway, no engine lights or running problems and sail through the emissions tests....
  8. Went to run an errand in my '95 NA auto import and could hear some weird noise as I drove. Stopped and found that the post cat O2 sensor was dangling by its wire and bouncing along the road surface. On inspection the centre bit of the sensor has detached from its oval mounting boss (which has largely disintegrated). I understand the post cat sensor doesn't do much so I have stuck it back into the exhaust hole with some metal epoxy putty. The old mounting boss fixings (8mm bolts) look like they will be a bit of a challenge to remove for sensor replacement so planning to keep it like that for now. Anyone else encountered this issue? Stephen
  9. Bit more information....after dismantling the gear change, discovered the switch is working and searching the appropriate ECU pin. And driving, found that the MANU function was operating correctly, but with no indication on the dash. So I think either the ECU is not outfitting an indication, it's not getting to the dash, or the telltale indication isn't working.
  10. Following a year off the road having a respray, I noticed the MANU button not operating on my '93 N/A auto. I checked that the switch is providing a momentary connection to earth when depressed as I believe it should. It's non-latching and I can't quite remember if it was always that way, I believe the problem lies with the ECU. No 12 V on the feed from pin 18, hence no voltage drop when the the MANU button is pressed. Anyone else had a similar fault? Any other ideas? Stephen
  11. Stunning bright yellow Supra spotted. Looks amazing!
  12. Thanks Kevin, super quick delivery, great items and exceptionally well packed! Much appreciated mate.
  13. Thanks for the quick response Evin. That might be OK. I'll wait and see if any other offers emerge (with intact tabs). Anyway would be better than my disintegrated housing - got a little close to a passing lorry...Is it silver?
  14. In Silver (199) preferably. Just the outer housing needed, doesn't need the glass or innards necessarily. Steve
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.