Jump to content
The mkiv Supra Owners Club

Black_Supra

Club Members
  • Posts

    426
  • Joined

3 Followers

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Black_Supra's Achievements

Newbie

Newbie (1/14)

7

Reputation

  1. Hey mate, i rebuilt it and after i drove further 1000 KM for "run in" i took the car apart and sold everything! I think the bearing failed due to following: I had 4 axial bearing failures on the Turbo. Each time it received a whole rebuild through a good shop. There was a design failure on the old BW Turbos. On the 4th rebuild the Turbo received a 360° axial bearing, before it just had a 270° axial bearing. The 270° axial bearing couldn`t hold the force and there was a lot of wear on the material. This material was in the engine/oil because i made no oil change after each Turbo rebuild. This is just my oppinion but it seems plausible. Then i bought the GT-R which i own till today and I´m really happy with the car. But last year there was a chance to get a supra again and i bought it here from the Forum!
  2. Hey guys, as i don`t need a alarm system in Germany i removed it from the car. It was in perfect working condition. Furthermore it included the Intellistart to start the car from outside without a key. Everything is included but you need to know what to do - this system needs a lot of connections! offers welcome as i don`t know what it`s worth in the currenct condition! thanks
  3. I checked the wiring again. Still got the active aero Switch in but i don`t have the aero lip. The Switch wasn`t connected - i connected it but no Change. Still got at 100 kmh (around 60 mph) the red light flashing and the TRC doesn`t work. It flashes up every 2-3 seconds.
  4. Thanks. Yeah, i aleady took a look. Got no active Spoiler but still got the switch. I got a pre VVTI Engine
  5. No error codes "I already readout the error memory with a paperclip but no errors were saved"
  6. Hey guys, last year i had no Problems with the car. In the winter i changed the whole speedo Cluster from TRD to a OEM one. I did nothing further to the car so just to let you know ... The car is a Facelift TT6 one. When i started the car this year the TRC warning light startet to flash on and off. The whole time, it doesn`t disappear. The TRC isn`t working. Furthermore the red warning light in the middle of the speedo pops up when i drive over 60 mph and it stays until i turn the car off. I don`t know if the TRC failure correlates to the warning light failure but this seems strange to me. Maybe these are two different failures but I´m not sure. I already readout the error memory with a paperclip but no errors were saved. I realized, that the TRC stepper motor makes a "click" noise around 25-30 times when i start the car with a break between each "click" of around 1-2 seconds. Anybody knows what this could be? A broken ABS sensor or a bad stepper motor or potentiometer at the TB? thanks in advance
  7. Searching as the title says a A02B Diff thanks!
  8. Yeah, this would be great!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.