-
Posts
95 -
Joined
supra87's Achievements
Newbie (1/14)
0
Reputation
-
Wanted ffim for a ge not after anything super fancy.
-
Cheers David much appreciated - - - Updated - - - Cheers David much appreciated
-
Evening guys looking for some advice regarding my na-t build I've got almost everything I need to start the build I've been collecting parts for the past year and I'm almost at the point I can make a start I just have a few questions I need answers too. I'm wanting to run a ffim however I'm struggling to get my head around all the vacuum pipes has anyone got any pics that could help me out ?.Secondly I'm auto what will i need to do with the kick down cable coming from the gearbox? Also whats the recommend number for setting the base timing ive seen people mention 7 degrees btdc up to 10 degrees btdc I'll be using a piggyback standard na head gasket running low boost 7psi any help will be much Appreciated.
-
Evening guys looking for some advice regarding my na-t build I've got almost everything I need to start the build I've been collecting parts for the past year and I'm almost at the point I can make a start I just have a few questions I need answers too. I'm wanting to run a ffim however I'm struggling to get my head around all the vacuum pipes has anyone got any pics that could help me out ?.Secondly I'm auto what will i need to do with the kick down cable coming from the gearbox? Also whats the recommend number for setting the base timing ive seen people mention 7 degrees btdc up to 10 degrees btdc I'll be using a piggyback standard na head gasket running low boost 7psi any help will be much Appreciated.
-
Engine out or drop the subframe for the return feed for the feed I'm going to use the big bolt that holds the oil housing on.
-
Greddy replica intake manifold, with fuel rail and throttle body
supra87 replied to Dim Sum's topic in Parts for Sale
Has this sold ? -
Any left
-
Emanage blue ultimate complete with everything to install
-
Final Supra parts clear out, lots of bits in one box....cheap
supra87 replied to Carbon_Bullet's topic in Parts for Sale
Coils still for sale ? -
Rob looks like you've not had much look finding an answer have you tried asking on the na-t page on Facebook I think a few guys on there use that ecu
-
Sorry for the delayed reply it was the crank bolts 4 of them were finger tight the flex plate literly had 1mm play in hinsight it should have been checked in the first place but we were convinced it was bottom end so didn't even bother checking
-
Ok guys finally solved the rattle took gearbox off as I was Gona change the tc and boom the bloody flex plate wasn't tight 4 of the bolts were finger tight coulnt belive it anyway all is good now thank you all for the advice and help it was much appreciated
-
Ge exhaust gasket need it for a stencil so any condition will do
-
Na-t guys Good afternoon I'm currently in the middle of making my own ffim for my ge in preparation of going na-t In the future how has everyone got around the vacuum pipes on the tb and plenium are they all needed or can some be removed totally confused any help would be much appreciated.