Jump to content
The mkiv Supra Owners Club

dk_supra

Club Members
  • Posts

    421
  • Joined

dk_supra's Achievements

Newbie

Newbie (1/14)

12

Reputation

  1. New in Toyota cradle box, sealed as it came from the dealer a month ago. A customer ordered this, it came, he changed his mind, lost the downpayment so this is up for sale. Price is 3000 euros plus shipping to anywhere in Europe. No extra taxes or customs due to EU. I can open the box and post pictures. This item comes complete assembled with NEW short blocck 2JZ-GTE New Pistons New Connecting Rods New Crankshaft This is the new version 2JZ-GTE engines for the 1998-2001 MKIV Supras with the different bung for the low oil pressure sensor, not the old generation that needed to be checked for thrust bearing and crankwalk etc. Perfect candidate and far more economical for replacement of a worn engine, and i guess the only way to build a HP monster without the worries of cracks, wrapped decks etc. Ready to ship anywhere in Europe. Thanks Dimitri
  2. 40 pounds shipped to Greece zip code 19600. Let me know.
  3. straightsix, how much you want for yours? thanks DK
  4. Of course no worries, im aware that postage is kind more expensive than shipping inland
  5. I'll have them please, can you ship to greece, via parcelforce???
  6. Hi there, anybody has a good not crooked fan with a good hydraulic unit?? thanks Dimitri
  7. For sale a brand new short block in the toyota sealed box with wrap and everything. Part Number is 11400-49085. Dealer price on this is now around 5800 Euros. http://www.toyodiy.com/parts/p_E_1994_TOYOTA_SUPRA_JZA80R-AJFVZW_1102.html I'm willing to sell for 3300 Euros or 2700 pounds. Shipping will be freight insured and it will be roughly around 180 euros from Greece to any European country. This short block comes complete with crank, pistons and rods assembled. I'm selling it for the price it costed me when i bought it last year as a backup for my car. Since funds are supporting other projects at the moment, and the Supra is going strong there is no reason to keep this in the storage. I was quoted from my dealer over 5k to get this part couple of weeks ago. I believe this far easier for anybody that wants to refresh his engine compared to the upgraded piston-rods scenario which roughly run around 4k euros and sometimes are somewhat not guaranteed on the quality side. Since these engines can reliably go around 600-700rwhp in stock form I believe it is the best option at the price i'm posting it right now. Regards Dimitri
  8. one more getrag will be available in a week. pedals, clutch etc will come with it of course. only the front part of the prop will come with it. dismantler was of low iq and cut it, instead of slipping out of the mid bearing. let me know. next set will be around feb 2012. last one for 2011 from me.
  9. thanks jurgen. can i have a gr6 on exchange. you know me a lot of vr38 lately
  10. Hey guys, I got all the pm, tried to answer all of them, I have send the pictures to some people. On Monday i will try to locate the pivot clip that connect the shifter and the gear selector rod, and also the clutch fork and the spring for that. I know that these pieces are really very inexpensive, but I would like to make sure that whoever gets the box will have everything needed. So far the list is 1.V160 complete with reverse and speedo switches. 2. tripod with selector from 93-95 (the short shift one - stock item) 3. 4 nuts for the flange in the back 4. Clutch masters pressure plate. 5. Clutch masters clutch plate + 2 stock discs (one new , one used) 6. Master cylinder complete 7. Slave cylinder complete with bracket 8. Brake pedal complete assembly with switch 9. Clutch pedal complete assembly with switch 10. I have an auto prop shaft front part, which i can send out and get it longer to facilitate the v160. We use the yokes and remove the center tube, weld a longer one and then balance it, and it's done. 11. Throw out bearing with housing and springs, clips everything for the clutch. I cannot find a flywheel, but i have for 750 euros a complete HKS twin clutch if anybody wants it. Pictures on Monday of that as well. The HKS twin clutch comes with new arp bolts for the flywheel. My plan is to open the box on Monday afternoon take pictures inside and check everything that is perfect as I have stated, just for buyers assurance, and for my own piece of mind. It will be resealed perfectly and refilled with new toyota fluid. Please everybody wait until Monday night before you pm me or call me again. The pictures show what i have taken out of the storage on Friday night. Everything is quite dirty but on Monday everything will be cleaned and boxed up nicely.
  11. A lot of interest, many pm's but nothing solid yet. As a lot of people have asked me, I have many things to give away with the box for free, just to clean space. The parts i got are all from RHD cars, which i really have no need. 1. Master clutch cylinder 2. Slave clutch cylinder 3. clutch masters clutch 4. Flywheel (i think i got one) 5. B&M short shifter many more parts, when i get some solid answers I can go to the storage and pop everything out. cheers Dimitri
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.