Joeatphr

When you run boost or in the Supra's case a lot of boost. Oil is forced out, not by having a weak motor but because thats the nature of forcing 20-40psi of air into the motor. Its simply a catch can to get all the oil and either recirculate it or drain it in a more proper place.

Starting out I have a set of slightly used HKS RS Coilovers for the Supra. Around 10 miles or so on our race car. Took them off for another set of HKS Drag Coils that were rebuilt. These are factory HKS spring rates, not sure what that might be but it is fairly stiff. Asking $1200 for them. http://img546.imageshack.us/img546/7118/dsc0097bc.jpg http://img832.imageshack.us/img832/5620/dsc0098cp.jpg Full Race T4 Exhaust Manifold (Version 2), Coated, Used but *NEW COATING* MINT CONDITION - Asking $1700 http://img94.imageshack.us/img94/860/dsc0099ve.jpg Painless Meth Kit - 1Gallon Part # 65000 New In box Asking $550 - On Amazon for $700! http://img202.imageshack.us/img202/5544/dsc0100gy.jpg http://img708.imageshack.us/img708/4733/dsc0102ux.jpg http://img545.imageshack.us/img545/7695/dsc0103h.jpg Weisco 3.2L and 3.4L 2JZGTE (86.5mm Bore) Stroker Pistons - NEW IN BOX Asking $600 a set http://img52.imageshack.us/img52/4505/dsc0104j.jpg Manley 3.0L 2JZGTE Pistons 86.5mm Bore - NEW IN BOX Asking $500 a set http://img854.imageshack.us/img854/3325/dsc0105uy.jpg OBIWAN - JEDI Ninja Turbo. This is a one off one of the first ever secret billet turbochargers on a car to the market. This is a 71mm Billet from precision but has no markings. This was a prototype but was a solid unit. Was on the car for for a while, great shape, no smoke. JOURNAL BEARING .70A/R 3.5" Vband Exhaust, 4" Inlet ASKING $750 for the unit. http://img38.imageshack.us/img38/3650/dsc0107tu.jpg http://img710.imageshack.us/img710/6004/dsc0109ap.jpg http://img577.imageshack.us/img577/3549/dsc0111fum.jpg http://img35.imageshack.us/img35/1338/dsc0114hq.jpg GTX42R with precision exhaust housing, 6" Inlet, 4" Exhaust, .96A/R Exhaust Housing LIKE NEW, polished could use a heat coating or turbo blanket. ASKING $2200 http://img577.imageshack.us/img577/3310/dsc0115al.jpg http://img194.imageshack.us/img194/5680/dsc0116xi.jpg http://img825.imageshack.us/img825/4123/dsc0117e.jpg I Have a like new CLEAN set of CCW LM20's for Lexus IS300 with new tires on them 17x8.5 front with 6.5" backspacing 17x9.5 rear with 7.5" backspacing toyo proxes tires 235/45/17 proxes t1r front 275/40/17 proxes tq rear Not sure if they will fit a Supra. http://i611.photobucket.com/albums/tt194/genesperformance/IMAG0087.jpg http://i611.photobucket.com/albums/tt194/genesperformance/IMAG0088.jpg http://i611.photobucket.com/albums/tt194/genesperformance/IMAG0089.jpg http://i611.photobucket.com/albums/tt194/genesperformance/IMAG0090.jpg ASKING $3K

Turbonetics T-37169 70mm with 4" Inlet, .55 compressor exducer, .70AR exhaust housing with 3" Vband, T4 Flange, Ball Bearing - 1000 miles and dynotime. $800USD SHIPPED Notes - Has been coated in the past but could be recoated for $75 and polished for $75 http://img687.imageshack.us/img687/9393/img0503ot.jpg http://img695.imageshack.us/img695/5522/img0504c.jpg Garrett GT42R (80mm) Almost new, 5" Intake, T4 Flanged Divided, 4" Exhaust Vband, Newly Polished and heat coated, 100 miles or less on street and dyno $1500USD shipped http://img802.imageshack.us/img802/6393/img0505.jpg http://img403.imageshack.us/img403/2842/img0506bv.jpg http://img522.imageshack.us/img522/1143/img0507qp.jpg Thanks, Joe

Sorry im late to this thread, have taken off a few days because of a death in the family and this week has been hell catching up! The MAP ECU 1 does not have all the controls that the 2 does and is slowly becoming more and more outdated or should I say just not updated? The MAP ECU 1 serves a function and does it well. Doesnt have a lot of the bells and whistles that more people demand now days but it also only cost $400 USD. As for the MAP ECU II it was the NEWEST version and is ALWAYS updated with new software, firmware upgrades, linked to new bigger and better things. Changes recently made is it being linked to wifi and the Iphone or bluetooth I believe. Its also going USB I believe instead of the serial port. The map ecu II has just as many functions or more than the Emanage Ult. + you get the knowledge and deep technical support you need with the MAP ECU II unlike the Greddy where there is NO WAY you could call greddy and they would help you. MAP ECU makes on a few products that revolve around the MAP ECU itself and of course they're going to be on the ball about what needs to be done, problems they may have will be fixed etc. If something honestly major would happen to the AEM or Greddy they would put it on the backburner or discontinue it. I know how they work. You can call MAP ECU up right now depending on the hour of day and they will help you, spend time on the phone answering tech questions etc, there is EVEN a forum just about the unit!! I have supported the MAP ECU and its brand for over 10 years now and they have always been supportive and came through for us. If you dont think you can tune it then if you can tune a FIC or Motec, HKS etc then you can tune this. Its a breeze, simplistic and easy to walk through. Peter will be chimming in this thread to shed more technical data on the matter. Thanks, Joe

Updated the price!!

No sir

You want the GT42R?

Pmed.

Turbonetics T-37169 70mm with 4" Inlet, .55 compressor exducer, .70AR exhaust housing with 3" Vband, T4 Flange, Ball Bearing - 1000 miles and dynotime. $900USD SHIPPED Notes - Has been coated in the past but could be recoated for $75 and polished for $75 http://img687.imageshack.us/img687/9393/img0503ot.jpg http://img695.imageshack.us/img695/5522/img0504c.jpg Turbonetics PHR Spec 4" Compressor Housing, 67mm 3 years old with less than 2k miles of driving, break in and dynotime. .70AR exhaust, T4 Flange, tapped for Boost and EGT. $500USD SHIPPED Notes - Has been coated in the past but could be recoated for $75 and polished for $75 http://img844.imageshack.us/img844/3972/img0510js.jpg http://img704.imageshack.us/img704/3902/img0508qg.jpg Garrett GT42R (80mm) Almost new, 5" Intake, T4 Flanged Divided, 4" Exhaust Vband, Newly Polished and heat coated, 100 miles or less on street and dyno $1800USD shipped http://img802.imageshack.us/img802/6393/img0505.jpg http://img403.imageshack.us/img403/2842/img0506bv.jpg http://img522.imageshack.us/img522/1143/img0507qp.jpg Thanks, Joe

Euro Channel being made!!

Everyone: For everyone that is a large GAMER and always post on here for the following games ie: Starcarft 2 COD Modern Warefare 2 Left 4 Dead 1&2 Counter Strike Anything Steam Related I personally will be hosting a LARGE server based on how many people will join. Working on a 100man Vent server for everyone to join and enjoy. I will need everyone to PM me their Name / Game tag / game that is played If a game above is not listed please let me know and I will create a group. The payment will be sent to [email protected] and will need to be sent as a GIFT!!! Payment will be $3 per person or $6 per person that will want admin rights. I will only allow 2 admins per section. Server is live with users playing! Supra of Doom and I will be the Admins of SCII so dont ask. If for some reason you pay and there is an issue with the server or things dont go as planned then you will be refunded in full. Again PM your details and once the server is up I will PM you SERVER DETAILS! Paypal is [email protected] and please send as a gift to avoid fee's! ONCE DETAILS HAVE BEEN GIVEN OUT PLEASE DO NOT PROVIDE TO ANYONE ELSE AS THAT IS UNFAIR. IF THERE IS A GAMER TAG THAT IS IN THE SERVER AND IS NOT ON THE PAID LIST YOU WILL BE BANNED!!! SupraOfDoom : DoomDash / 190 PAID JoeAtPHR : Joeatphr / 686 PAID Killme4food :Myslowevo / 441 (NOT IN VENT YET) JoeC : Joewitafro / 399 (ON VENT BUT WAITING ON PP) Getawayinmoscow : Lambokiller / 166 PAID MrKyle : Dustoff / 967 PAID Crazy9ceguy : Bancheese / 908 PAID Russian MKIV : Madrussian / 461 PAID MKIIINA : MKIIINA / 380 (NOT ON VENT YET) Lilbeastie18 : DaManInDaSky / 732 (NOT ON VENT YET) C44 : CFOFO / 404 PAID Immortal_K : Kariido / 419 (NOT ON VENT YET) Aaronc222 : GuySmiley / (NO CODE YET) PAID http://img19.imageshack.us/img19/2355/sc2hf.jpg Thanks again, Joe

Brand New GT4202R Silver Heat Coating Polished 1.01A/R Rear Housing READY TO BOLT ON AND GO! $2500 or best offer http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT42/GT4202_731376_2.htm Thanks, Joe

I have one here but dont know if you want from another country.

Incredible, such a wonderful customer!!!! Heart breaking. PHR sends their regards.

I have the ATI Pulley and new UR Accessory pulleys if thats what you would like!! Let me know sir. Thanks, Joe