Daston Posted February 12, 2007 Share Posted February 12, 2007 Hi guys If I was to fit a front mount intercooler (IE Greddy 2 row) would I have to loose my hard pipe going onto my intake manifold as that has my BOV fitted on it. Quote Link to comment Share on other sites More sharing options...
uk-rich Posted February 12, 2007 Share Posted February 12, 2007 i should say you will be able to keep it, does the 2 row come with a hard pipe kit ? Quote Link to comment Share on other sites More sharing options...
DamanC Posted February 12, 2007 Share Posted February 12, 2007 the two row comes witht he HP kit. You should be able to keep the existing one in place fella Quote Link to comment Share on other sites More sharing options...
michael Posted February 12, 2007 Share Posted February 12, 2007 It all depends on the route the existing pipe takes compared with the new one... without knowing where the one you have now goes it's hard to say. I'd be more tempted to fit the full FMIC pipework and then get the BOV fitted on a proper welded adapter. Quote Link to comment Share on other sites More sharing options...
kslb Posted February 12, 2007 Share Posted February 12, 2007 When i had my HKS Type R fitted i lost the BOV but i am sure it is possible to keep it. Can you not get the new hard pipe customed to take it???? Quote Link to comment Share on other sites More sharing options...
Nic Posted February 13, 2007 Share Posted February 13, 2007 It all depends on the route the existing pipe takes compared with the new one... without knowing where the one you have now goes it's hard to say. I'd be more tempted to fit the full FMIC pipework and then get the BOV fitted on a proper welded adapter. Is that a Blitz BOV? Is your current hard pipe aluminium or steel? The GReddy FMIC includes alu hard pipes, if your current hard pipe is also alu then you should be able to eaily cut the bracket off and weld onto the new hard pipe. Alternatively you can buy an alu flange for the BOV. If you need any help with sourcing a flange or FMIC just give me a shout. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.