Guest smallpaul Posted February 10, 2007 Share Posted February 10, 2007 ok folks have a prob. mr plod dont like the idea of no front plate lol altho it was in the window i still got a fine so where is the best looking place to put it on a veilside front end? i was thinking on the lower bit?? suggestions? Quote Link to comment Share on other sites More sharing options...
uk-rich Posted February 10, 2007 Share Posted February 10, 2007 not a suggestion, but what was the fine as i have no front plate Quote Link to comment Share on other sites More sharing options...
Oly Posted February 10, 2007 Share Posted February 10, 2007 You could get one of those number plate holders (that come in two bits) and just use the top half and stick it to the top of the veilside - seen that b4- looks cool... Quote Link to comment Share on other sites More sharing options...
Oly Posted February 10, 2007 Share Posted February 10, 2007 You shouldn't get a fine IMO You should of said u where just waiting to put it on cos it was out the shop or something Quote Link to comment Share on other sites More sharing options...
Jake Posted February 10, 2007 Share Posted February 10, 2007 ok folks have a prob. mr plod dont like the idea of no front plate lol altho it was in the window i still got a fine so where is the best looking place to put it on a veilside front end? i was thinking on the lower bit?? suggestions? See my garage (here) for a Veilside front with number plate. BTW, I think your Shift Key has packed up. Quote Link to comment Share on other sites More sharing options...
SoundWave Posted February 10, 2007 Share Posted February 10, 2007 I also have a front number plate holder, pics in my garage. It was on when I bought the car and it says Blitz. From first look it seems like it can fold up out of sight at will, but sadly that is not the case! Quote Link to comment Share on other sites More sharing options...
TrickTT Posted February 11, 2007 Share Posted February 11, 2007 Mines mounted in the same place as Jakes. Just a thin piece of sheet steel, bent to just over 90deg, sprayed and bolted to the bumper. Then fasten the numberplate on top. I had a full size one made at the same time as the little one, but never been stopped for it yet Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted February 11, 2007 Share Posted February 11, 2007 I ran my doluck nose with no plate for about 4 months, i now have a teenie plate on (thought i was due to run out of luck!) I went to Halfrauds, asked for a normal plate, and trimmed it myself to size Quote Link to comment Share on other sites More sharing options...
crashoverride Posted February 11, 2007 Share Posted February 11, 2007 i have 2 little brackets that attach mine, the brackets are little hinges so the plate folds out of the way when driving. cool little trick. Quote Link to comment Share on other sites More sharing options...
Guest smallpaul Posted February 11, 2007 Share Posted February 11, 2007 thanx guys the fine was £30 my story was i was gonna put it on but i only had the car back a few days after the front bumper being sprayed which wasnt far from the truth. Lincs police for ya ive been by many police cars in Leics without it on and they have just done nothing im guessing its as lincs has lots of front facing cams which i was tempted to set off on purpose after the ticket lol Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted February 11, 2007 Share Posted February 11, 2007 Stick your number plate in the bumper aperture where the FMIC goes. Everyone thinks this restricts air flow but it doesn't in my case as the 'hinged' brackets allow the plate to fly up when the vehicle is in motion. The boys that are doing all of my bodywork thought of that idea when they did a recent R34 bodykit and wondered where to put the plate - cunning eh! Quote Link to comment Share on other sites More sharing options...
Guest smallpaul Posted February 11, 2007 Share Posted February 11, 2007 im thinking the that sounds very good indeed hehe thanx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.