Wanted - Model standard and JGTC Supras

[Ewen]

Any scale, any maker, as long as they are.....
a) Either true JGTC or accurate standard (not Jtuners / modded etc)
b) As close to mint as possible

I'll buy entire complete series if available.

Thanks in advance:)

[ChrisSZ]

You tried Tamiya? So long as you're not too ham-fisted and can wield a small paintbrush you can get some pretty good results :) :)
http://i37.photobucket.com/albums/e82/chrisfalcke/DSCF0769.jpg
http://i37.photobucket.com/albums/e82/chrisfalcke/DSCF0768.jpg

[Ewen]

You tried Tamiya? So long as you're not too ham-fisted and can wield a small paintbrush you can get some pretty good results :)
Hi Chris, I've got the Castrol Toms, Sard and standard Supra Tamiya ones:)
I see you didnt bother with the tiny decals on the bonnet louvres either:d

[Garfy]

I turned one of them into a slot car

[Ewen]

Bump:)
Wanted - Model standard and JGTC Supras
Any scale, any maker, as long as they are.....
a) Either true JGTC or accurate standard (not Jtuners / modded etc)
b) As close to mint as possible

I'll buy entire complete series if available.

Thanks in advance

[Ewen]

Bump again:)

Wanted - Model standard and JGTC Supras
Any scale, any maker, as long as they are.....
a) Either true JGTC or accurate standard (not Jtuners / modded etc)
b) As close to mint as possible

I'll buy entire complete series if available.

Thanks in advance
__________________

[RedM]

Red Kyosho?

[Ewen]

Red Kyosho?
You are a star, oh yes you are.
Yes please Martin (tries to stay calm:)). You sure you want to sell ? Let me know the details, Id rather not do paypal if thats ok.
Yippee:d

[Branners]

I think Nic was selling his whole collection a while back. Serious number of models.

JB

[RedM]

I don't know what it's worth TBH. I paid £110 for it on Fleabay. It turned up with a loose rear wheel but otherwise in mint condition. I should have given the seller negative feedback for not mentioning it but three years of trying to get one and finally doing so made me a bit forgiving.

I've never tried to fix it. If I can I'll sell, if I can't fix it I'll keep it. Will have a go at the weekend.

[Ewen]

I think Nic was selling his whole collection a while back. Serious number of models.
JB
I think I ended up with most of them JB:)

[Ewen]

I don't know what it's worth TBH. I paid £110 for it on Fleabay. It turned up with loose rear wheel but otherwise in mint condition. I should have given the seller negative feedback for not mentioning it but three years of trying to get one made and finally doing so made me a bit forgiving.
I've never tried to fix it. If I can I'll sell, if I can't fix it I'll keep it. Will have a go at the weekend.
Ill happily take it with wobbly wheel Martin...if theres no other problems Ill be happy to offer close to what you paid.
Let me know...I too have been after one of these for quite a while.

[RICHARDA]

Cripes are they really worth that much, I paid a tenner for a silver kyosho one from a guy who owned a Supra and a model shop. Mines got a wobbly wheel aswell.

[Ewen]

Cripes are they really worth that much, I paid a tenner for a silver kyosho one from a guy who owned a Supra and a model shop. Mines got a wobbly wheel aswell.
Is it the 1:18 one or the 1:43 one ? The 1:18ths are very rare now, fetching good money. When you get bored with it, let me know, Ill do better than a tenner :)

[juanchan]

I think I ended up with most of them JB:)

Any pics lying around of your Supra model collection? :)

[Ewen]

Any pics lying around of your Supra model collection? :)
Heres a thread that got started a while back...I never got round to posting all of them.
http://www.mkivsupra.net/vbb/showthread.php?t=83243&highlight=autoart&page=5
Loads at work, but most of my current JGTC lot are here...

[juanchan]

Heres a thread that got started a while back...I never got round to posting all of them.
http://www.mkivsupra.net/vbb/showthread.php?t=83243&highlight=autoart&page=5
Loads at work, but most of my current JGTC lot are here...

:thumbs:

Don't recall the thread you've linked to, but having a good butchers now :)

[RICHARDA]

Is it the 1:18 one or the 1:43 one ? The 1:18ths are very rare now, fetching good money. When you get bored with it, let me know, Ill do better than a tenner :)

Yep 1:18 scale I guess I was just lucky. I normally find FOS and the Goodwood revival meets good for picking up decent models as there are loads of trade stands.

[Trig]

Loads at work, but most of my current JGTC lot are here...

ewan where did you you get the 1:32 ultraflo on the right of the pic??

[Ewen]

ewan where did you you get the 1:32 ultraflo on the right of the pic??
That one and the No.38 au above it are Scalextric Trig. Suprisingly highly detailed they are too. I got mine in Toys R Us, but Ive seen them all over the place.
http://www.scalextric.com/cars-3/category.html?actionClass=com.othercommerce.scalextric.shop.actions.ProductActions&filter=supra&actionToken=ai0mWerTD4Ne1&actionMethod_doSetFilter=Refine

[Trig]

That one and the No.38 au above it are Scalextric Trig. Suprisingly highly detailed they are too. I got mine in Toys R Us, but Ive seen them all over the place.
http://www.scalextric.com/cars-3/category.html?actionClass=com.othercommerce.scalextric.shop.actions.ProductActions&filter=supra&actionToken=ai0mWerTD4Ne1&actionMethod_doSetFilter=Refine

Did have a feeling they were as im sure you cant get the ultraflo supra in 1:32 other than scalextric :)

Think ill have to purchase a couple :)

[Max Headroom]

I have a US Bomex Supra model kit made by AOSHIMA BUNKA KYOZAI CO LTD, everything is in Japanese but I think its 1/25th Scale once built

[Ewen]

I have a US Bomex Supra model kit made by AOSHIMA BUNKA KYOZAI CO LTD, everything is in Japanese but I think its 1/25th Scale once built
:)Sorry...got side tracked....are you looking to sell it or just letting us know you have one ?

[RedM]

Ewen,

I have an ARII Plastic Models Supra exactly like this one.
http://www.modelsforsale.com/catalog/product_info.php?products_id=324273

All in Japanese.

I never got round to making it. It's gathering dust. Yours in exchange for an address to send it to. If you want it that is.

[Ewen]

Ewen,
I have an ARII Plastic Models Supra exactly like this one.
http://www.modelsforsale.com/catalog/product_info.php?products_id=324273
All in Japanese.
I never got round to making it. It's gathering dust. Yours in exchange for an address to send it to. If you want it that is.
:)Thats very nice of you. PM on its way.

[RedM]

Jolly good. I'll post it on Saturday morning.