PDA

View Full Version : wiring an alarm into central locking?


cookci
02-02-07, 23:44
i have the code ca670 as shown below...

http://webappshttp.voxdmz.audiovox.com:1025/webapp/wcs/stores/servlet/ProductDisplay.jsp?catalogId=10001&storeId=10001&productId=10198&langId=-1&desc=Remote%20Start%20Systems

the installation manual is on the link given. would anyone be kind enough to help me theoretically wire up the central locking part. the instructions are clear for the rest of the alarm wiring but not this. With my last alarm i remember there being six wires for this... not 2!!!

Do i just wire these 2 wires to central locking switch in the door or what? please help!

cookci
04-02-07, 20:32
bump help

jagman
04-02-07, 22:07
looks like you have green and blue supply for open and close,splice these into the doorlock switch open and close wires that go to the solenoid inthe drivers door-sounds easy but probably not! as earth line is not mentioned, "professional installation strongly reccommended" is writen at the top in bold!