bowk1uk Posted January 18, 2007 Share Posted January 18, 2007 finished my na-t at last runs really good feels like its twice as fast turbo kicks at around 3500rpm then goes like crazy xs power turbo ,manifold, dp,wg, bov,intercooler boost logic intercooler pipe 2mm cometic hg iridium spark plugs 460cc rx7 injectors aem wideband aem tru boost controller apexi neo hks fcd walbro fuel pump apexi filter Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 18, 2007 Share Posted January 18, 2007 Looks nice bud but your going to need a turbo blanket:cool: Quote Link to comment Share on other sites More sharing options...
Ian W Posted January 18, 2007 Share Posted January 18, 2007 looks very smart mate, good job did you tot up how much in total? Quote Link to comment Share on other sites More sharing options...
Al Massey Posted January 18, 2007 Share Posted January 18, 2007 very nice mate,how much it cost to do this? Quote Link to comment Share on other sites More sharing options...
bowk1uk Posted January 18, 2007 Author Share Posted January 18, 2007 Looks nice bud but your going to need a turbo blanket:cool: there is one on it ,its in the 1st pic Quote Link to comment Share on other sites More sharing options...
Kip Posted January 18, 2007 Share Posted January 18, 2007 Well done mate sounds like a neat project, but I do have to ask why you would do that when you could have bought a tt? Quote Link to comment Share on other sites More sharing options...
Supragaz Posted January 18, 2007 Share Posted January 18, 2007 Nice one Quote Link to comment Share on other sites More sharing options...
supra steveo Posted January 18, 2007 Share Posted January 18, 2007 ooooohhhh nice i want one Quote Link to comment Share on other sites More sharing options...
dr_blackman Posted January 18, 2007 Share Posted January 18, 2007 Sweet mate Quote Link to comment Share on other sites More sharing options...
bowk1uk Posted January 18, 2007 Author Share Posted January 18, 2007 Well done mate sounds like a neat project, but I do have to ask why you would do that when you could have bought a tt? owned this for 4 years now, i remeber how hard it was to find a good na back then most of them were dogs this worked out cheaper than selling and buying a tt , cost just over £2500 doing it myself Quote Link to comment Share on other sites More sharing options...
JustGav Posted January 18, 2007 Share Posted January 18, 2007 I have to ask, how have you shielded the hot side of the turbo from the silicon, in the photo's it almost looks like it is touching... Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted January 18, 2007 Share Posted January 18, 2007 Nice work, bowk1uk I've pm-ed you a couple of times on the clubna-t forum (archanox). I;m glad everything is working now as it should! Quote Link to comment Share on other sites More sharing options...
bowk1uk Posted January 18, 2007 Author Share Posted January 18, 2007 I have to ask, how have you shielded the hot side of the turbo from the silicon, in the photo's it almost looks like it is touching... its very close ,couple of mm gap have a turbo blanket with manifold wrap underneath, it seems to be ok up to now,done quite a few miles allready if it does cause a problem will mod the manifold to lower the turbo Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 18, 2007 Share Posted January 18, 2007 I have to ask, how have you shielded the hot side of the turbo from the silicon, in the photo's it almost looks like it is touching... This along with the fact that its close to the distributor is why turbofit custom build there manifolds. Quote Link to comment Share on other sites More sharing options...
SupraStar 3000 Posted January 18, 2007 Share Posted January 18, 2007 Well done! Looks like a top job VERY VERY envious! Quote Link to comment Share on other sites More sharing options...
DannyW Posted January 18, 2007 Share Posted January 18, 2007 Well done! Looks like a top job VERY VERY envious! Booked yours in yet Ed? Quote Link to comment Share on other sites More sharing options...
bowk1uk Posted January 18, 2007 Author Share Posted January 18, 2007 Nice work, bowk1uk I've pm-ed you a couple of times on the clubna-t forum (archanox). I;m glad everything is working now as it should! thanks mate hope your install is still going ok Quote Link to comment Share on other sites More sharing options...
Scooter Posted January 18, 2007 Share Posted January 18, 2007 its very close ,couple of mm gap have a turbo blanket with manifold wrap underneath, it seems to be ok up to now,done quite a few miles allready if it does cause a problem will mod the manifold to lower the turbo or maybe get a 2nd hand bonnet and get a uk style or smaller scoop setup for air cooling? Quote Link to comment Share on other sites More sharing options...
Scooter Posted January 18, 2007 Share Posted January 18, 2007 Well done mate sounds like a neat project, but I do have to ask why you would do that when you could have bought a tt? if you are into DIY then its possibly cheaper/better if you know you have a good NA. Also replacement NA engine £200-300............TT engines more like £1000............ Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted January 18, 2007 Share Posted January 18, 2007 thanks mate hope your install is still going ok Thanks, my project is about to start. I will make a topic on clubna-t about the progress Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.