csa Posted January 12, 2007 Share Posted January 12, 2007 I going to make a conversion to HID xenon any time soon, but what socket should I use on my 1994 eurospec LHD turbo (with glass headlights)? Quote Link to comment Share on other sites More sharing options...
Nic Posted January 12, 2007 Share Posted January 12, 2007 I going to make a conversion to HID xenon any time soon, but what socket should I use on my 1994 eurospec LHD turbo (with glass headlights)? My guess would be that they'd be same as the UK spec glass headlights. ie. Low Beam = 9006/HB4 High Beam = 9005/HB3 Fog Lights = H3 I would check what bulbs you have fitted at the moment though to make sure. Quote Link to comment Share on other sites More sharing options...
csa Posted January 12, 2007 Author Share Posted January 12, 2007 well, I've looked at the current bulbs, but I can't really figure 'em out..what should I look for? and btw...whats high and whats low on the headlamps. (it seems that the previous owner really screwed this up) Quote Link to comment Share on other sites More sharing options...
Nic Posted January 12, 2007 Share Posted January 12, 2007 Low is the normal driving headlight (middle one of 3) High is the brighter headlight (the inner ones of the 3). The headlight should have the bulb code written on it, it is molded into the black plastic headlight housing, if my memory serves me right. Or remove you bulbs and see what bulb code is on them. Quote Link to comment Share on other sites More sharing options...
csa Posted January 12, 2007 Author Share Posted January 12, 2007 super...I'll try again then...so the outer outer one of the 3 is the foglight? Quote Link to comment Share on other sites More sharing options...
Nic Posted January 12, 2007 Share Posted January 12, 2007 super...I'll try again then...so the outer outer one of the 3 is the foglight? Yes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.