boromfccup Posted January 10, 2007 Share Posted January 10, 2007 hi what size screw/bolt are they want to buy some before removing old ones with new capheads and rubbers/bottom Quote Link to comment Share on other sites More sharing options...
Guest Matt_C Posted January 10, 2007 Share Posted January 10, 2007 I found that the ones on the hatch didn't need doing and that the bolts could be re-used without any problems. I also re-used the lower screws on one side as Mr T only gave me two instead of four.... I cut the rubber off as close to the car as possible to expose the screws and used this to heat them up Worked a treat and the screws came out with ease, hence were used again. The mini blow torch was £9.99 from Motor World and a couple of quid for the gas from a Newsagent (Lighter re-fill). Quote Link to comment Share on other sites More sharing options...
boromfccup Posted January 10, 2007 Author Share Posted January 10, 2007 thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.