Lewis Posted January 2, 2007 Share Posted January 2, 2007 All, I have bought a complete active spoiler assembly (minus undertray - plan to cut), in my 'kit' I have: Active spoiler motor/frame 2 silver triangular brackets Active spoiler ECU Active spoiler switch The spoiler itself I plan to retro-fit this to my facelift TT (RZ) I don't have: Any bolts/nuts/washers whatsoever Any wiring/plugs etc Now....I haven't yet checked the loom, I would be surprised if I need any wiring (thoughts?) I am presuming I will need some bolts/nuts/washers/selotape/pritt-stick, is this the case or does it bolt to the chassis using existing bolts (I don't even have anything to attach the spoiler to the motor assembly). The seller (a member) said that I should let them know if I needed any bolts etc so I will try them first BUT I have no idea WHAT I need (if anything). a) does anyone have a list of parts or descriptions of any bolts etc required? b) could someone with an EPC please post up an exploded diagram of the active spoiler system so that I can see what it is that I don't have? I am at my other house and don't have an EPC here. Any help is more than appreciated as always. Lewis Quote Link to comment Share on other sites More sharing options...
colsoop Posted January 2, 2007 Share Posted January 2, 2007 See attached for the EPC image. Most of the bolts you will need are the same as you find on the stock plastic undertray. There are a couple of mounting points undeneath the headlights as well, just above the mounting points for the towing hooks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.