boromfccup Posted December 23, 2006 Share Posted December 23, 2006 want to go bpu but the decats about 200.00 thers a full system including 2 decats on ebay http://cgi.ebay.co.uk/TOYOTA-SUPRA-TWIN-TURBO-JZA80-Performance-exhaust_W0QQitemZ300015644085QQihZ020QQcategoryZ38786QQtcZphotoQQcmdZViewItem?hash=item300015644085 are these any good ive some make called jasma on mine its 3 inch cat back any views Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted December 23, 2006 Share Posted December 23, 2006 Jasma isnt actually a make It is a test Japanese exhausts have to pass. Blue flame used to make bike exhausts iirc, it might work, but the pipework looks a little small. Quote Link to comment Share on other sites More sharing options...
CardiffSupra Posted December 23, 2006 Share Posted December 23, 2006 Looks ok to me, I think Jasma is something to do with the standard sounding exhaust. I've got Jasma stamped on my Fujismo exhaust. Quote Link to comment Share on other sites More sharing options...
boromfccup Posted December 23, 2006 Author Share Posted December 23, 2006 cheers mate shows what i know its got three letters but not hks going to have a look i thnk it says fwitsubo on it any views on the one at top of thread hers some pics of my exhaust Quote Link to comment Share on other sites More sharing options...
CardiffSupra Posted December 23, 2006 Share Posted December 23, 2006 Mate thats the same one i got, All i know is it says Fujitusbo on the mid pipe. Quote Link to comment Share on other sites More sharing options...
boromfccup Posted December 23, 2006 Author Share Posted December 23, 2006 any good or should i go for the one with the two decats and new exhaust for 350 at top link Quote Link to comment Share on other sites More sharing options...
Shane Posted December 23, 2006 Share Posted December 23, 2006 I have a Blueflame system on mine. It was bought before they sold them off the shelf for the MK4 and I had to take my car there and they built it on the motor while I waited. The photo is the same one they use for most of their systems so you cant really tell much from that. My system was built in 2.5" stainless and has nice smooth bends. They took out the second cat and spent a long time getting it right. I was there ALL day. They were happy to use 3" if I had wanted them to but as mine is a NA at the moment and if I do go forced I will be only running 0.4bar max I went with 2.5" to retain a bit of back pressure. All I can say is that it sounds really nice and is much less restrictive than the stock system. It is not too loud, pretty quiet in fact but once the first cat is out it will all change of course, although it is not loud it sounds really nice and EVERY petrol head I know has commented on how it sounds I reckon it was good money spent for a system with a lifetime warranty and made out of stainless. I also got a choice of tail pipes. and chose one as close in looks to the stock system as poss. If you would like I am happy to try and get a few pics from underneath for you. Blueflame produce all the OEM systems for TVR and Bentley too I think, that has to be a pretty good reccomendation. Quote Link to comment Share on other sites More sharing options...
Kranz Posted December 23, 2006 Share Posted December 23, 2006 Its the same as mine, an OS Giken Super dragger. Its a good exhaust and fine for BPU. Not too loud too.... until you go decatted Get 2nd decat pipes from Fleabay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=010&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=200061001148&rd=1&rd=1 or there's new ones for £45. Keep an eye out for first decat pipes. There's loads about. Quote Link to comment Share on other sites More sharing options...
boromfccup Posted December 23, 2006 Author Share Posted December 23, 2006 cheers is that one on ebay a first de cat pipe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.