Guest timalbert Posted November 22, 2006 Share Posted November 22, 2006 i have a 4300k hid kit for my dipped lights and would like to put a kit on my fogs aswell! anyone done this? Quote Link to comment Share on other sites More sharing options...
imi Posted November 22, 2006 Share Posted November 22, 2006 I think Lui has..and gamer Quote Link to comment Share on other sites More sharing options...
jamesmark Posted November 22, 2006 Share Posted November 22, 2006 A lot of people have done it iirc, you have to mod it slightly but i am sure it's not that hard Quote Link to comment Share on other sites More sharing options...
jamesmark Posted November 22, 2006 Share Posted November 22, 2006 http://www.mkivsupra.net/vbb/showthread.php?t=76235&page=2&highlight=fogs Quote Link to comment Share on other sites More sharing options...
TrickTT Posted November 22, 2006 Share Posted November 22, 2006 I've got them as well. Just drill the (removable) black plastic rear covers that go behind the fog light bulb, feed the wires from the HID bulbs through, then seal the holes with silicon. This will stop the lights misting up. Quote Link to comment Share on other sites More sharing options...
Guest timalbert Posted November 22, 2006 Share Posted November 22, 2006 cheers,i will give it a try.my ballasts for my dipped lights are tucked up under the bumper.would a second set of ballasts cause interference with my current ballasts? Quote Link to comment Share on other sites More sharing options...
SteveL Posted November 22, 2006 Share Posted November 22, 2006 Make sure the ballasts are somewhere dry - I recently lost one of mine 'cos it got wet over a period of time and was soaked! Quote Link to comment Share on other sites More sharing options...
ChrisSZ Posted November 22, 2006 Share Posted November 22, 2006 I had them fitted in the fogs with no worries. Yes, you can tape or zip-tie the ballasts together with no ill-effect. If they are placed somewhere where they might get wet I'd certainly look into ensuring they are fully waterproofed (wrap in clingfilm, tape and plastic bags perhaps?) Quote Link to comment Share on other sites More sharing options...
Mike B Posted November 22, 2006 Share Posted November 22, 2006 Are they same light dispersion as dipped beam? Does enyone have problems with their fog conversion dazzling other motorists or are you only using them when it's foggy? I'd like to have more dipped beam power, but not if I get hassle! Quote Link to comment Share on other sites More sharing options...
ChrisSZ Posted November 22, 2006 Share Posted November 22, 2006 Beam dispersal is greater i.e. wider and less focussed. I had no problems at all with other drivers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.