leonv Posted October 20, 2006 Share Posted October 20, 2006 I completed my de-cat to achieve 1.1 to 1.2 boost.If I set the boost at 1.1 boost the car cuts out. At first I thought that the car did not come with a FCD as advertised, but there is one installed. 2nd thought was that the FCD is faulty, but the car still boost to 1 bar and does not cut out at 0.9 boost. Any similar experience or some advise would be much appreciated Quote Link to comment Share on other sites More sharing options...
Steviekid Posted October 20, 2006 Share Posted October 20, 2006 What type of FCD is installed? Quote Link to comment Share on other sites More sharing options...
leonv Posted October 20, 2006 Author Share Posted October 20, 2006 What type of FCD is installed? I will have to double check and come back to you. I checked it last night in the dark, and did not have a very good torch. Quote Link to comment Share on other sites More sharing options...
Steviekid Posted October 20, 2006 Share Posted October 20, 2006 I will have to double check and come back to you. I checked it last night in the dark, and did not have a very good torch. Check the wiring and the setting it's at too (all the ones I've come across are adjustable). Fuel cut occurs at 1.0bar by the way so the car would boost ok to 0.9bar anyway. Quote Link to comment Share on other sites More sharing options...
Jake Posted October 20, 2006 Share Posted October 20, 2006 Sounds like your FCD is borked. Boost cut occurs at 1.0 bar on the stock car without a FCD. Quote Link to comment Share on other sites More sharing options...
leonv Posted October 20, 2006 Author Share Posted October 20, 2006 I was informed by (the experts) that it won't boost over 0.9 without the FCD and that is how I got to that figure. Quote Link to comment Share on other sites More sharing options...
Jake Posted October 20, 2006 Share Posted October 20, 2006 The experts? Who? Quote Link to comment Share on other sites More sharing options...
leonv Posted October 20, 2006 Author Share Posted October 20, 2006 The experts? Who? I don't want to mention the name, I don't think that is fair, but they work on a lot of sups. Quote Link to comment Share on other sites More sharing options...
Jake Posted October 20, 2006 Share Posted October 20, 2006 OK. Anyway, you'll need to fit a working FCD if you want to boost past 1.0 bar. Unless you have a GReddy/HKS one and the rotary dial inside is set incorrectly Quote Link to comment Share on other sites More sharing options...
leonv Posted October 21, 2006 Author Share Posted October 21, 2006 OK. Anyway, you'll need to fit a working FCD if you want to boost past 1.0 bar. Unless you have a GReddy/HKS one and the rotary dial inside is set incorrectly Cheers for your input Jake.Will check what make it is this morning, Leon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.